Effect of graphite content on the microstructure and mechanical properties of Al5SiC-xCgr hybrid composites produced by powder metallurgy

被引：0
|
作者：
Wasik, Anna [1 ]
Leszczynska-Madej, Beata [1 ]
Madej, Marcin [2 ]
机构：
[1] AGH Univ Sci & Technol, Fac Non Ferrous Met, Dept Mat Sci & Nonferrous Met Engn, Mickiewicza 30 Ave, Krakow, Poland
[2] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, Dept Phys & Powder Met, Mickiewicza 30 Ave, Krakow, Poland
来源：
MRS COMMUNICATIONS | 2023年 / 13卷 / 01期
关键词：
Composite; Hybrid; Powder metallurgy; Microstructure; Scanning electron microscopy (SEM); Tribology; ALUMINUM-MATRIX COMPOSITES;
D O I：
10.1557/s43579-023-00322-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the addition of graphite (2, 8 wt%) in aluminum and in Al5SiC composites on the microstructure and mechanical properties was investigated. The hybrid composites were fabricated through powder metallurgy technology, applying single-action compaction press (300 MPa) and free sintering (600?) in a protective nitrogen atmosphere. The addition of SiC particles to Al-xCg(r) composites reduced the weight loss in friction process. On the other hand, the addition of graphite in hybrid composites reduced the friction coefficient in relation to the matrix and the Al5SiC composites. The SEM analysis of worn surface revealed both abrasive and adhesive wear tracks.
引用
收藏
页码：121 / 128
页数：8
相关论文
共 50 条
  • [1] Effect of graphite content on the microstructure and mechanical properties of Al5SiC-xCgr hybrid composites produced by powder metallurgy
    Anna Wąsik
    Beata Leszczyńska-Madej
    Marcin Madej
    MRS Communications, 2023, 13 : 121 - 128
  • [2] Effect of the graphite content on the tribological properties of hybrid Al/SiC/Gr composites processed by powder metallurgy
    Zeren, Adalet
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2015, 67 (03) : 262 - 268
  • [3] EFFECT OF THE SIC CONTENT ON THE TRIBOLOGICAL PROPERTIES OF HYBRID AL/GR/SIC COMPOSITES PROCESSED BY IN SITU POWDER METALLURGY (IPM) METHOD
    Akhlaghi, F.
    Mahdavi, S.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1878 - 1886
  • [4] Effect of mechanical alloying on the properties of powder metallurgy composites of the Al-SiC system
    L. R. Vishnyakov
    N. P. Onis’kova
    A. N. Gribkov
    I. M. Romashko
    Powder Metallurgy and Metal Ceramics, 1997, 36 : 599 - 603
  • [5] Effect of mechanical alloying on the properties of powder metallurgy composites of the Al-SiC system
    Vishnyakov, LR
    Onis'kova, NP
    Gribkov, AN
    Romashko, IM
    POWDER METALLURGY AND METAL CERAMICS, 1997, 36 (11-12) : 599 - 603
  • [6] Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy
    Karakoc, Halil
    Ovali, Ismail
    Dundar, Sibel
    Citak, Ramazan
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (06): : 5348 - 5361
  • [7] Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy
    Halil K.
    Ismail O.
    Sibel D.
    Ramazan Ç.
    Journal of Materials Research and Technology, 2019, 8 (06) : 5348 - 5361
  • [8] Effect of ECAP on microstructure and mechanical properties of a commercial 6061 Al alloy produced by powder metallurgy
    Chang, SY
    Lee, KS
    Choi, SH
    Shin, DH
    JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 354 (1-2) : 216 - 220
  • [9] The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy
    Celebi, Muslim
    Guler, Onur
    Canakci, Aykut
    Cuvalci, Hamdullah
    JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (24) : 3395 - 3408
  • [10] Effect of nano-SiC content on mechanical properties of SiC/2014Al composites fabricated by powder metallurgy combined with hot extrusion
    Wang, Z. -G.
    Li, C. -P.
    Wang, H. -Y.
    Zhu, X.
    Wu, M.
    Jiang, Q. -C.
    POWDER METALLURGY, 2016, 59 (04) : 236 - 241
12345