Unsteady mixed convective MHD boundary stagnation point nanofluid flow with multi-slip effects, variable wall temperature and porosity phenomenon

This research highlights the physical significance of nanoparticle in magnetohydrodynamics (MHD) stagnation point flow (SPF) over a stretchable surface with porosity effect and boundary slip phenomenon. The nanoliquid and its advanced thermal activity are shown extra auspicious results when the flow is considered over a permeable (porous) medium. In addition, the nanoparticles of radius size play an important role in the thermal performance of nanofluid. In this work, copper is accounted as a nanoparticle and water as a base fluid. Nanomanufacturing, surface engineering, coatings, nanofabrication and tribology are some of the important and special mechanical characteristics of nanoparticles [D. Guo, G. Xie and J. Luo, J. Phys. D, Appl. Phys. 47, 013001 (2014)]. The flow is electrically conducted in the presence of applied magnetic field. Mixed convection, Joule heating and viscous dissipation effects are accounted in the mathematical modeling. Appropriate similarity variables are used to convert the couple governing system of PDEs into ordinary ones and results are computed through bvp4c via shooting concept. From the obtained results, it is divulged that the velocity field increases against higher estimations of unsteady parameter, while it declines versus larger magnetic parameter and radius of nanoparticles. The engineering interest like skin friction and Nusselt number is mathematically calculated and results are computed in a tabular form, and their obtained outcomes show that the magnitude of skin friction rises against unsteadiness parameter and radius of nanoparticles. This study is an extended work of [Verma et al. Chem. Eng. J. Adv. 12, 100366 (2022)] with some extra flow assumptions like MHD, SPF, Joule heating, heat generation/absorption and viscous dissipation. Obtained results are compared with [Grubka and Bobba J. Heat Transf. 107, 248 (1985)], Verma et al. [Chem. Eng. J. Adv. 12, 100366 (2022)] and [Elbashbeshy and Emam Therm. Sci. 15, 477 (2011)] found 100% accuracy with them. The most important result of the conducted study is that the skin friction coefficient immensely augments subject to larger estimations of radius of nanoparticles when permeability of porosity is less.