Study on mechanical properties of wind turbine blades with bend-twist coupling effect

Bend-twist coupling (BTC), a method of passive load alleviation for turbine blade, has a significant influence on blade mechanical properties. The coupling behavior between bending and twisting motions stems from the material anisotropy in blade laminate or from the unique blade geometry such as sweep, deflection, and pre-bending. The material-based approach is employed in this research to determine influence regularity of BTC design on blade mechanical properties. To begin with, the blade property analysis tool PreComp that integrates a shear flow method with the classical laminate theory is adopted to compute the cross-sectional stiffnesses of the blades with different degree of BTC effect. Next, the bend-twist coupling coefficients for the BTC blades with different fiber orientation are calculated. Finally, the remaining mechanical properties including static performance, modal characteristics and buckling limits for different BTC blades are determined by the finite element method and the influence of changes in the degree of BTC effect on all these mechanical properties is further evaluated. The results show that the BTC effect markedly influences the different mechanical properties of the blade in different patterns. The 20 degrees BTC blade has the highest BTC coefficient and the edgewise BTC coefficient at 100 m is 2.5 times higher than the flapwise BTC coefficient, while the maximum value of the torsional modal frequency of 3.8429 Hz and the greatest critical buckling load of 4328.1 kN corresponds to the 10 degrees BTC blade and the 15 degrees BTC blade respectively.