Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments

被引：7

作者：

Qu, Haozheng J. ^{[1
]}

Chikhalikar, Atharva S. ^{[1
]}

Abouelella, Hamdy ^{[1
]}

Roy, Indranil ^{[1
]}

Rajendran, Rupesh ^{[1
]}

Nagothi, Bhavani S. ^{[1
]}

Umretiya, Rajnikant ^{[1
]}

Hoffman, Andrew K. ^{[1
]}

Rebak, Raul B. ^{[1
]}

机构：

[1] Gen Elect Res Ctr, 1 Res Circle, Schenectady, NY 12309 USA

来源：

CORROSION SCIENCE | 2024年 / 229卷

关键词：

Accident tolerant fuels; FeCrAl alloys; Molybdenum; Nuclear cladding materials; Steam; -oxidation; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; MO; AIR; MICROSTRUCTURE; ZIRCONIUM; MODEL; APMT;

D O I：

10.1016/j.corsci.2024.111870

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of 0, 1, 3 wt% Mo addition on the corrosion behavior of Fe21Cr5.5Al was studied through steam tests at 400 degrees C and 1200 degrees C. At 400 degrees C, Mo addition leads to non-protective Fe-Mo oxide growth on the surface, compromising protective uniform Cr oxide growth and subsequent Al2O3 layers as in the Mo-free specimen. At 1200 degrees C, the presence of Mo causes the spallation of the surface oxide scale. However, a thin alumina surface film was present. Current results show that Mo addition is detrimental to the corrosion resistance of FeCrAl alloy under both operational and accidental temperature scenarios.

引用

页数：8

共 50 条

[1] Effect of aluminum on the FeCr(Al) alloy oxidation resistance in steam environment at low temperature (400?C) and high temperature (1200?C)
Chikhalikar, Atharva
Roy, Indranil
Abouelella, Hamdy
Umretiya, Rajnikant
Hoffman, Andrew
Larsen, Mike
Rebak, Raul B.
CORROSION SCIENCE, 2022, 209
[2] Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes
Hoffman, Andrew K.
Umretiya, Rajnikant, V
Gupta, Vipul K.
Larsen, Michael
Graff, Corey
Perlee, Christopher
Brennan, Patrick
Rebak, Raul
JOM, 2022, 74 (04) : 1690 - 1697
[3] Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes
Andrew K. Hoffman
Rajnikant V. Umretiya
Vipul K. Gupta
Michael Larsen
Corey Graff
Christopher Perlee
Patrick Brennan
Raul Rebak
JOM, 2022, 74 : 1690 - 1697
[4] Effect of grain refinement on high temperature steam oxidation of an FeCrAl alloy
Rittenhouse, Joshua
Luebbe, Matthew
Hoffman, Andrew
Liu, Yuzi
Rebak, Raul B.
Islamgaliev, Rinat K.
Valiev, Ruslan Z.
Jalan, Visharad
Wen, Haiming
CORROSION SCIENCE, 2024, 226
[5] Effect of magnesium on high-temperature oxidation (1100-1200 degrees C) of a FeCrAl alloy with misch metal
El messki, S
Buscail, H
Caudron, E
Cueff, R
Riffard, F
Issartel, C
Perrier, S
JOURNAL DE PHYSIQUE IV, 2004, 118 : 315 - 321
[6] Improved oxidation resistance of Cr/FeCrAl coating on Zr alloy in high-temperature steam environment
Yang, Xiaoling
Luan, Baifeng
Chen, Lijun
Wu, Jinlong
Zhu, Pengzhou
Zhou, Hongling
Ruan, Haibo
Huang, Weijiu
Sun, Chao
Qiu, Shaoyu
SURFACE & COATINGS TECHNOLOGY, 2023, 473
[7] Improvement of steam oxidation resistance of the γ-TiAl alloy with microarc oxidation coatings at 900-1200 °C
Xu, Chi
Zhu, Minghao
Guan, Haohao
Gao, Chuanli
Jin, Xiaoyue
Du, Jiancheng
Xue, Wenbin
CORROSION SCIENCE, 2022, 209
[8] Effects of steam concentration and flow rate on the high temperature oxidation of PEO-coated zirconium alloy at 1000 °C and 1200 °C
Guan, Haohao
Wang, Xingping
Xu, Chi
Liao, Yizhao
Gao, Chuanli
Du, Jiancheng
Jin, Xiaoyue
Xue, Wenbin
Zhang, Jinlong
SURFACE & COATINGS TECHNOLOGY, 2022, 448
[9] A Study of the Oxidation of Gd-Doped FeCrAl in 1000 °C Steam Environments
Liu, Riu
Sun, Hongliang
Guo, Qianqian
Jiang, Minjin
Jiang, Xiaosong
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (03) : 978 - 992
[10] A Study of the Oxidation of Gd-Doped FeCrAl in 1000 °C Steam Environments
Riu Liu
Hongliang Sun
Qianqian Guo
Minjin Jiang
Xiaosong Jiang
Journal of Materials Engineering and Performance, 2023, 32 : 978 - 992

← 1 2 3 4 5 →