Alleviation of Self-Heating Effect in Top-Gated Ultrathin In2O3 FETs Using a Thermal Adhesion Layer

In this work, a thin layer of hexagonal boron nitride (h-BN) or HfO2 serves as an adhesion layer between the ultrathin atomic-layer-deposited (ALD) indium oxide (In2O3) channel and a sapphire substrate to enhance the thermal interfacial conductance. A thermo-reflectance (TR) measurement system with high spatial resolution is introduced to experimentally demonstrates the improvement. With the thin h-BN or HfO2 interlayer, the temperature elevation (delta T) induced by self-heating effect (SHE) is decreased by roughly 9% or 27%, respectively. To quantify the improvement of the interfacial heat transfer, a steady-state thermal diffusion model with a finite-element method is combined with the experimental TR observation to extract the effective thermal boundary conductance (TBC) values in each case. It is shown that the effective TBC is ameliorated by a factor of 2 or 7 with the h-BN or HfO2 interlayer, which is responsible for the delta T reduction. Furthermore, phonon density of states (PDOS) distribution mismatch implies that the intersection over union (IOU) ratio in the acoustic phonon region of In2O3 with h-BN or HfO2 is roughly 3 or 11 times higher than that directly with sapphire, which is responsible for the profound TBC enhancement. Based on this, ultrahigh maximum drain current of 2.4 mA/mu m is achieved with 2.1-nm-thick In2O3 channel on a sapphire substrate with an HfO2 interlayer in between due to the alleviated SHE.