Numerical calculation for instability criterion of tearing modes influenced by energetic ions

被引:1
|
作者
Ma, Yuehao [1 ]
Zhang, Runzhe [1 ]
Cai, Huishan [1 ]
机构
[1] Univ Sci & Technol China, Sch Nucl Sci & Technol, CAS Key Lab Geospace Environm, Hefei 230026, Peoples R China
基金
中国国家自然科学基金;
关键词
tearing modes; circulating energetic ions; deposition position; INTERNAL KINK MODES; STABILITY;
D O I
10.1088/1361-6587/acfff2
中图分类号
O35 [流体力学]; O53 [等离子体物理学];
学科分类号
070204 ; 080103 ; 080704 ;
摘要
The instability criterion of tearing modes, including the effects of circulating energetic ions (CEIs), is numerically solved through an iterative method and fast Fourier transform algorithm. The influence of beta (the ratio of pressure to the magnetic pressure) profile of CEIs and magnetic shear on instability criterion of the tearing modes are investigated systematically. CEIs impact the tearing modes through altering the total perturbed parallel current density, and the gradient of their beta profile at the rational surface (the location of tearing mode) plays an important role. The effect of CEIs on tearing modes depends on the deposition position and the toroidal circulating direction of CEIs. Specifically, the on-axis peaked co-CEIs have a stabilizing effect on tearing modes. For off-axis peaked co-CEIs, in order to stabilize the tearing modes, the deposition position of co-CEIs should be located between the magnetic axis and rational surface, and there is an optimal peak width and deposition location where the stabilizing effect is strongest. For counter-CEIs, they would destabilize the tearing modes when the deposition position is located between the magnetic axis and rational surface. However, if the deposition position is located near the outside rational surface, counter-CEIs have a stabilizing effect on tearing modes. Furthermore, there exists a critical deposition position for CEIs. Whether CEIs plays a stable role or an unstable role depends on the deposition position within or outside the critical deposition position. The critical deposition position is related to the orbital width of CEIs. Finally, the magnetic shear can stabilize the tearing modes, but the effect of co-CEIs on tearing modes is weakened as the magnetic shear increases.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Influence of Energetic Ions on Tearing Modes
    Cai, Huishan
    Wang, Shaojie
    Xu, Yinfeng
    Cao, Jintao
    Li, Ding
    PHYSICAL REVIEW LETTERS, 2011, 106 (07)
  • [2] Influence of energetic ions on neoclassical tearing modes
    Cai, Huishan
    NUCLEAR FUSION, 2016, 56 (12)
  • [3] Influence of deeply trapped energetic ions on tearing modes
    Zhang, Xiaoxi
    Cai, Huishan
    Wang, Zheng-Xiong
    PHYSICS OF PLASMAS, 2019, 26 (06)
  • [4] Frequency chirping of neoclassical tearing modes by energetic ions
    Cai, Huishan
    NUCLEAR FUSION, 2021, 61 (12)
  • [5] Influence of energetic ions on tearing modes in a reversed field pinch
    Cai, Huishan
    Lin, Liang
    Ding, Weixing
    Anderson, J. K.
    Brower, D. L.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2015, 57 (02)
  • [6] The dynamics of a neoclassical tearing mode (NTM) influenced by energetic ions on EAST
    Li, Erzhong
    Igochine, V.
    Xu, L.
    Shi, T.
    Zhao, H.
    Liu, Y.
    Ti, A.
    White, R.
    Zhang, J.
    Zhu, Y.
    Huang, J.
    Shen, B.
    Lin, S.
    Qian, J.
    Gong, X.
    Hu, L.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2016, 58 (04)
  • [7] Effects of energetic ions on double tearing modes in reversed shear plasmas
    Wang, Xian-Qu
    Wang, Xiao-Gang
    NUCLEAR FUSION, 2017, 57 (01)
  • [8] NUMERICAL-CALCULATION OF TEARING MODES IN AXISYMMETRIC TOROIDAL GEOMETRY
    GRIMM, RC
    DEWAR, RL
    MANICKAM, J
    CHANCE, MS
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1980, 25 (08): : 864 - 864
  • [9] SUPPRESSION OF THE TEARING MODE BY ENERGETIC IONS
    HEGNA, CC
    BHATTACHARJEE, A
    PHYSICAL REVIEW LETTERS, 1989, 63 (19) : 2056 - 2059
  • [10] Ductile tearing simulation based on a local energetic criterion
    Marie, S
    Chapuliot, S
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1998, 21 (02) : 215 - 227