Transformation of inclusions in S32101 duplex stainless steel during continuous casting

被引：1
|
作者：
Chen, Xingrun [1 ,2 ]
Cheng, Guoguang [1 ]
Guo, Jing [3 ]
Pan, Jixiang [2 ]
机构：
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 10083, Peoples R China
[2] Hongxing Iron & Steel Co Ltd, Jiuquan Iron & Steel Grp Corp, Jiayuguan 735100, Peoples R China
[3] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China
来源：
METALLURGICAL RESEARCH & TECHNOLOGY | 2024年 / 121卷 / 02期
关键词：
S32101 duplex stainless steel (DSS); inclusion; continuous casting; Al2O3-MnO; TiN; thermodynamic calculation; CORROSION BEHAVIOR; MICROSTRUCTURE;
D O I：
10.1051/metal/2023092
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, the formation and characteristics of inclusions in S32101 duplex stainless steel (DSS) during continuous casting were investigated by analyzing inclusions in the tundish and continuous casting slabs. The composition of inclusions changed significantly during the continuous casting. The inclusion type in the tundish was primarily CaO-SiO2-Al2O3-MgO-MnO. There are two types of inclusions in the continuous casting slab: CaO-SiO2-Al2O3-MgO-MnO inclusions with dense Al2O3 and MnO, and Al2O3-MnO inclusions. TiN wraps the outer layers of both types of inclusions. The results obtained from thermodynamic calculations agreed with the experimental results. The weight percentage of Al2O3 and MnO in the inclusions increases significantly with the solidification process. In addition, the Al2O3-MnO inclusions were formed in the slab. TiN precipitates during the solidification of the S32101 DSS. The CaO-SiO2-Al2O3-MgO-MnO and Al2O3-MnO inclusions can be used as the nucleation sites of TiN.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] In situ observation of the oxidation of S32101 duplex stainless steel at 900 °C
    Jepson, M. A. E.
    Higginson, R. L.
    CORROSION SCIENCE, 2012, 59 : 263 - 269
  • [2] FERRITE CONTENT MEASUREMENTS IN S32101 LEAN DUPLEX STAINLESS STEEL AND ITS WELDED JOINTS
    Niagaj, J.
    Mazur, L.
    ARCHIVES OF METALLURGY AND MATERIALS, 2012, 57 (03) : 779 - 787
  • [3] Investigations on the Wear Performance of Coated Tools in Machining UNS S32101 Duplex Stainless Steel
    Sousa, Vitor F. C.
    Silva, Francisco J. G.
    Alexandre, Ricardo
    Pinto, Gustavo
    Baptista, Andresa
    Fecheira, Jose S.
    METALS, 2022, 12 (06)
  • [4] In situ investigation of crevice corrosion on UNS S32101 duplex stainless steel in sodium chloride solution
    Yang, Y. Z.
    Jiang, Y. M.
    Li, J.
    CORROSION SCIENCE, 2013, 76 : 163 - 169
  • [5] Austenite Morphology and Distribution Dependence of Impact Toughness in S32101 Duplex Stainless Steel Laser Welds
    Wang, Baojun
    Zhang, Yongpeng
    Shen, Xinjun
    Huan, Pengcheng
    Zhang, Qingyu
    Wang, Xiaonan
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (04): : 1183 - 1192
  • [6] Correlation of microstructure and dynamic softening mechanism of UNS S32101 duplex stainless steel during elevated temperature tensile testing
    Li, Wang
    Deng, Yue
    Gu, Jinbo
    Mu, Wangzhong
    Li, Jingyuan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 855
  • [7] Austenite Morphology and Distribution Dependence of Impact Toughness in S32101 Duplex Stainless Steel Laser Welds
    Baojun Wang
    Yongpeng Zhang
    Xinjun Shen
    Pengcheng Huan
    Qingyu Zhang
    Xiaonan Wang
    Metallurgical and Materials Transactions A, 2024, 55 : 1183 - 1192
  • [8] Understanding the relation between pitting corrosion resistance and phase fraction of S32101 duplex stainless steel
    Ha, Heon-Young
    Lee, Tae-Ho
    Lee, Chang-Geun
    Yoon, Hanme
    CORROSION SCIENCE, 2019, 149 : 226 - 235
  • [9] Effect of Heat Treatment on the Localized Corrosion Resistance of S32101 Duplex Stainless Steel in Chloride/Sulphate Media
    Loto, Roland Tolulope
    Loto, Cleophas Akintoye
    Olaitan, Akanji
    Joseph, Olufunmilola
    TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2019, : 959 - 966
  • [10] Laser filling welding repair process for U-shaped groove of S32101 duplex stainless steel
    Zhu, Jialei
    Guo, Fangtao
    Li, Shougen
    Zhang, Renxiang
    Zhang, Xiaochun
    Mei, Le
    Huang, Guojun
    Hanjie Xuebao/Transactions of the China Welding Institution, 2024, 45 (10): : 69 - 78
12345