Antibacterial effect of periodic structure formed on SUS430 by using nanosecond pulsed laser

被引:0
|
作者
Okazaki, Mikuru [1 ]
Hashida, Masaki [2 ,3 ]
Iwamori, Satoru [2 ]
机构
[1] Tokai Univ, Course Sci & Technol, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 2591292, Japan
[2] Tokai Univ, Res Inst Sci & Technol, 4-1-1 Kitakaname, Hiratsuka, Kanagawa 2591292, Japan
[3] Kyoto Univ, Inst Chem Res, Uji, Kyoto 6110011, Japan
关键词
antibacterial effect; periodic structure; stainless steel; nanosecond laser; LIPSS; SURFACE DAMAGE; IRRADIATION;
D O I
10.2351/7.0001196
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
We investigated the laser-induced periodic surface structures (LIPSSs) formed on an SUS430 surface by irradiation with a nanosecond pulsed laser (Nd:YAG, wavelength of 532 nm, pulse width of 10 ns, number of pulses of 50, repetition rate of 10 Hz, and laser fluence of 1.2 J/cm(2)) and the antibacterial effect of the surface. LIPSSs with an interspacing of about 500 nm, which was close to the laser wavelength, were produced on the surface when the pulsed laser was near the ablation threshold. The film attachment method (JIS Z 2801) was used to measure the bacterial growth suppression on SUS430 surfaces with and without LIPSSs. On the surface without an LIPSS, the number of colonies was 1244, and on that with an LIPSS, the number was 198, indicating that the LIPSS formed by nanosecond pulsed laser irradiation inhibited the growth of bacteria. The chrome oxide layer on the SUS430 surface with the LIPSS may emit chrome ions from the edge of the LIPSS, enhancing the antibacterial effect.
引用
收藏
页数:5
相关论文
共 50 条
  • [1] Laser bendability of SUS430/C11000/SUS430 laminated composite and its constituent layers
    S. M. Hossein Seyedkashi
    Mohammad Hoseinpour Gollo
    Jin Biao
    Young Hoon Moon
    Metals and Materials International, 2016, 22 : 527 - 534
  • [2] Laser Bendability of SUS430/C11000/SUS430 Laminated Composite and Its Constituent Layers
    Seyedkashi, S. M. Hossein
    Gollo, Mohammad Hoseinpour
    Biao, Jin
    Moon, Young Hoon
    METALS AND MATERIALS INTERNATIONAL, 2016, 22 (03) : 527 - 534
  • [3] Evolution of microstructure and mechanical properties of SUS430/C11000/SUS430 composites during the laser-forming process
    Hamed Delfan Abazari
    Seyed Mohammad Hossein Seyedkashi
    Mohammad Hoseinpour Gollo
    Young Hoon Moon
    Metals and Materials International, 2017, 23 : 865 - 876
  • [4] Evolution of microstructure and mechanical properties of SUS430/C11000/SUS430 composites during the laser-forming process
    Abazari, Hamed Delfan
    Seyedkashi, Seyed Mohammad Hossein
    Gollo, Mohammad Hoseinpour
    Moon, Young Hoon
    METALS AND MATERIALS INTERNATIONAL, 2017, 23 (05) : 865 - 876
  • [5] Forming Limits Prediction of Laminated SUS430/Al1050/SUS430 Composites and the Effect of Component Properties on Mechanical Performance
    Li, Xin
    Liu, Chunguo
    Zhang, Mingzhe
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (16)
  • [6] Effect of HCl Concentration on the Pickling Behavior of SUS430 Stainless Steel
    Shi, Peiyang
    Di, Lin
    Wei, Jun
    Jiang, Maofa
    Liu, Chengjun
    CHINA POSTDOCTORAL FORUM ON MATERIALS SCIENCE AND ENGINEERING, 2011, 266 : 250 - +
  • [7] Experimental research of casting SUS430 using cooling nozzle with homogenous core
    National Engineering and Research Center for Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China
    不详
    Kang T'ieh, 2006, 10 (29-31):
  • [8] SOLIDIFICATION STRUCTURE REFINEMENT OF SUS430 FERRITIC STAINLESS STEELS BY ELECTRIC CURRENT PULSE
    Cao, Xin
    Yin, Zhenxing
    Cheng, Yufeng
    Li, Renxing
    Gong, Yongyong
    Zhai, Qijie
    EPD CONGRESS 2012, 2012, : 135 - 141
  • [9] EFFECT OF CAST STRUCTURE AND HOT-ROLLING CONDITION ON THE FORMABILITY OF SUS430 STAINLESS-STEEL SHEET
    HARASE, J
    UENO, I
    NAGAIE, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (07) : B261 - B261
  • [10] Effect of lanthanum hydroxide coating on the high temperature oxidation of SUS430 stainless steel
    Saito, A
    Saeki, I
    Furuichi, R
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1999, 85 (11): : 814 - 820