Detection and Lightweight Analysis of Large-Diameter Semi-Annular High-Order Aspheric Surface

被引：1
|
作者：
Cui Jinlong [1 ]
Hu Mingyong [2 ]
Bi Yachao [1 ]
Feng Zhiwei [1 ]
Bai Qian [1 ]
Chen Guangyu [1 ]
Xu Jianfeng [1 ]
机构：
[1] Hefei Univ Technol, Sch Instrument Sci & Optoelect Engn, Hefei 230009, Anhui, Peoples R China
[2] Hefei Univ Technol, Acad Optoelect Technol, Hefei 230009, Anhui, Peoples R China
来源：
LASER & OPTOELECTRONICS PROGRESS | 2023年 / 60卷 / 07期
关键词：
optical design; high-order aspheric surface; lightweight; third-order aberration; compensation detection; finite element;
D O I：
10.3788/LOP220869
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This study aims to accurately detect the surface shape of large-aperture high-order aspheric mirrors. A compensation detection system is designed, and lightweight analysis of a semi-annular concave high-order aspheric mirror with inner and outer diameters of 572 mm and 800 mm, respectively, is performed. Based on the theory of three-order aberration, the aspheric mirror is compensated for and detected using the double-lens structure and single-reflecting surface, and a compensation detection system with a root-mean-square (RMS) value of 0. 0037 lambda (lambda = 632. 8 nm) is developed. Triangular holes are used to lighten the high-order aspheric mirror. After achieving light weight, the weight of the lens body becomes less than 30 kg, and the weight reduction rate is 32. 7%. A finite element analysis of the high-order aspheric mirror and the support structure under its gravity, combined with the mechanical support structure, is conducted. The RMS values obtained when the optical axis is parallel and perpendicular to the direction of gravity are 0. 012 lambda and 0. 013 lambda, respectively. The maximum stresses on the mirror body and mechanical support structure are 1. 308x10(5) Pa and 1. 381x10(5) Pa, respectively. The stresses on the aspheric mirror and support structure are lower than the ultimate stress of the respective material.
引用
收藏
页数：8
相关论文
共 17 条
  • [1] Fan J L, 2007, The research on the testing methods of large aperture aspheric mirror, P3
  • [2] Guo Xi-qing, 2000, Optics and Precision Engineering, V8, P518
  • [3] Hao P M, 2017, Design of auxiliary optical system for aspheric surface inspection, P161
  • [4] He L, 2016, Laser & Optoelectronics Progress, V53
  • [5] Hu Wenqi, 2017, Chinese Journal of Quantum Electronics, V34, P394, DOI 10.3969/j.issn.1007-5461.2017.04.003
  • [6] Assembly-Alignment and Compensation of Imperfect Imaging Off-Axis Three Mirror System
    Li Zhaoyang
    Hu Mingyong
    Bai Qian
    Feng Zhiwei
    Liu Chenkai
    Cai Xiaobo
    Sun Dongqi
    [J]. ACTA OPTICA SINICA, 2021, 41 (04)
  • [7] Li Zhi-lai, 2015, Optics and Precision Engineering, V23, P1635, DOI 10.3788/OPE.20152306.1635
  • [8] Liu F W, 2020, Opto-Electronic Engineering, V47
  • [9] Liu L, 2016, Chinese Journal of Lasers, V43
  • [10] COMPUTER GENERATED HOLOGRAMS FOR TESTING OPTICAL ELEMENTS
    MACGOVERN, AJ
    WYANT, JC
    [J]. APPLIED OPTICS, 1971, 10 (03) : 619 - +
12