Study on the Countermeasures and Mechanism of Balanced Utilization in Multilayer Reservoirs at Ultra-High Water Cut Period

被引:5
|
作者
Wang, Yong [1 ,2 ]
Jiang, Hanqiao [1 ,2 ]
Wang, Zhiqiang [3 ]
Diwu, Pengxiang [4 ]
Li, Junjian [1 ,2 ]
机构
[1] China Univ Petr, State Key Lab Petr Resource & Prospecting, Beijing 102249, Peoples R China
[2] China Univ Petr, Sch Petr Engn, Beijing 102249, Peoples R China
[3] PetroChina Southwest Oil & Gas Field Co, Engn Technol Res Inst, Chengdu 610017, Peoples R China
[4] China Univ Petr, Coll Sci, Beijing 102249, Peoples R China
关键词
balanced utilization; multilayer reservoir; ultra-high water cut period; mechanism analysis; layer recombination; PATTERN MODIFICATION; OIL-RECOVERY; SALINITY;
D O I
10.3390/pr11113111
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
After entering the ultra-high water cut stage of multilayer oil reservoirs, the remaining oil is highly dispersed. Due to the continuous development of general water injection, the generation of advantageous channels makes interlayer contradictions more prominent, and the differences in the utilization between different layers are even greater. After the water drive development of multilayer oil reservoirs enters the ultra-high water cut stage, the development effect deteriorates year by year. Layer restructuring is an effective method of improving the water injection development effect and increasing the degree of utilization. In essence, its goal is to achieve balanced utilization for multiple development layers to increase the degree of recovery. This article mainly employs physical simulation experiments combined with reservoir numerical simulation technology to jointly study the effects of different equilibrium production strategies in the ultra-high water cut period of multilayer oil reservoirs and their mechanism of action based on the remaining oil distribution field and streamline field. As a specific implementation, we use large-plate physical simulation to demonstrate the effectiveness of the rotational injection and production strategy, and to supplement the physical simulation experiment with a reservoir numerical simulation model, we analyze the mechanism of different balanced production strategies. The research results for the combination of physical simulation experiments and numerical simulation experiments show that the combined strategy of rotary injection and rotary production is the most effective method for use in multilayer and ultra-high water cut oil reservoirs. The displacement effect of the high-permeability layer is better, and the increase in the recovery degree is relatively large, while the displacement effect of the low-permeability layer is relatively weak. After conventional water drive oil recovery, the remaining oil mainly exists in the edge area of the research area. However, the use of three-dimensional well network injection wheel recovery changes the streamline field, produces the effect of fluid flow diversion, expands the water drive sweep coefficient, and improves the recovery rate. Chemical plugging can effectively replace water drive oil recovery and will become the main method for improving the recovery rate of such reservoirs in the lower part.
引用
收藏
页数:17
相关论文
共 50 条
  • [1] A Microscopic Experimental Study on the Dominant Flow Channels of Water Flooding in Ultra-High Water Cut Reservoirs
    Yu, Chunlei
    Zhang, Min
    Chen, Wenbin
    Zhang, Shiming
    Wang, Shuoliang
    ENERGIES, 2024, 17 (22)
  • [2] Formation mechanism and distribution characteristics of micro residual oil in ultra-high water cut reservoirs a case study of yangsanmu oilfield
    Zhang, Shuo
    Zhang, Tao
    Zhang, Xianguo
    Yan, Mingming
    FOURTH INTERNATIONAL CONFERENCE ON ENERGY ENGINEERING AND ENVIRONMENTAL PROTECTION, 2020, 467
  • [3] Changes of reservoir characteristics during ultra-high water cut period: Shuanghe oilfield
    Yang, Xiaopei
    Feng, Yi
    Lu, Xiaoou
    Li, Baozhong
    Guo, Enchang
    Xinan Shiyou Xueyuan Xuebao/Journal of Southwestern Petroleum Institute, 2000, 22 (04): : 22 - 25
  • [4] Simulation analysis of the mechanism and influencing factors of remaining oil secondary enrichment in ultra-high water cut fault block reservoirs
    Cui, Chuanzhi
    Li, Jing
    Wu, Zhongwei
    Zong, Ran
    Kong, Weijun
    Li, Lifeng
    Zhang, Jianning
    Su, Shuzhen
    ENERGY EXPLORATION & EXPLOITATION, 2023, 41 (04) : 1189 - 1208
  • [5] Development prediction and the theoretical analysis in the ultra-high water cut stage for water-flooding sandstone reservoirs
    Xu J.
    Cui C.
    Ding Z.
    Xu P.
    Yao R.
    Wang P.
    Cui, Chuanzhi (cuichuanzhi@126.com), 1600, Springer Verlag (07): : 103 - 109
  • [6] The Mechanism Study of Fracture Porosity in High-Water-Cut Reservoirs
    Zhang, Ning
    Yin, Daiyin
    Cao, Guangsheng
    Li, Tong
    ENERGIES, 2024, 17 (08)
  • [7] Early-warning and differentiated adjustment methods for channeling in oil reservoirs at ultra-high water cut stage
    Jiang, Han-Qiao
    Zhongguo Shiyou Daxue Xuebao (Ziran Kexue Ban)/Journal of China University of Petroleum (Edition of Natural Science), 2013, 37 (05): : 114 - 119
  • [8] Study of the Law of the Water Driving in the Oil Field in the Ultra-high Water-cut Stage
    Li, Lili
    2016 ISSGBM INTERNATIONAL CONFERENCE ON INFORMATION, COMMUNICATION AND SOCIAL SCIENCES (ISSGBM-ICS 2016), PT 3, 2016, 68 : 556 - 561
  • [9] New water drive characteristic curves at ultra-high water cut stage
    Wang Jiqiang
    Shi Chengfang
    Ji Shuhong
    Li Guanlin
    Chen Yingqiao
    PETROLEUM EXPLORATION AND DEVELOPMENT, 2017, 44 (06) : 1010 - 1015
  • [10] A new water flooding characteristic curve at ultra-high water cut stage
    Shanshan Li
    Qihong Feng
    Xianmin Zhang
    Chunlei Yu
    Yingsong Huang
    Journal of Petroleum Exploration and Production Technology, 2023, 13 : 101 - 110