Microwave-photonic Vernier effect enabled high-sensitivity fiber Bragg grating sensors for point-wise and quasi-distributed sensing

This paper reports a sensitivity-improved fiber Bragg grating (FBG) sensor system based on microwave-photonic interferometry and the Vernier effect. An incoherent microwave photonics system based on a broadband light source is employed to interrogate the FBG sensor using the wavelength-to-delay mapping technique combined with interferometry. Specifically, the sensing FBG together with a reference FBG is used to construct a microwave photonics Michelson interferometer (MI). Changes in the Bragg wavelength of the sensing FBG subject to external perturbations are encoded into the spectral shifts of the microwave interferogram of the MI. A virtual interferometer is then generated from the sensing MI based on a computational Vernier effect modality. By superimposing the spectra of the sensing MI and the virtual interferometer, the Vernier effect is generated. By tracking the spectral shift of the Vernier envelope, it is shown that the measurement sensitivity of the sensing FBG is remarkably enhanced with an expected factor. Moreover, a quasi-distributed sensor system with enhanced sensitivity based on cascaded FBGs and the proposed virtual microwave-photonic Vernier effect technique is implemented, representing the first demonstration of a Vernier effect-enhanced FBG array sensor. Additionally, the possibility of employing the harmonic Vernier effect for further sensitivity enhancement is investigated, where a remarkable sensitivity enhancement factor up to 685 with a strain sensitivity of 94 MHz/mu E is successfully demonstrated.