Ceramic molds based on yttrium oxide for the casting of titanium alloys

被引：0
|
作者：
Chukmanova, M. T. [1 ]
Panichkin, A. V. [1 ]
Mamayeva, A. A. [1 ]
Kenzhaliyev, B. K. [1 ]
Azlan, M. N. [2 ]
机构：
[1] Satbayev Univ, Inst Met & Ore Beneficiat, Alma Ata, Kazakhstan
[2] Univ Pendidikan Sultan Idris, Fac Sci & Math, Phys Dept, Tanjung Malim 35900, Perak, Malaysia
来源：
KOMPLEKSNOE ISPOLZOVANIE MINERALNOGO SYRA | 2023年 / 01期
关键词：
molding mixture; yttrium oxide; binding agent; casting mold; titanium alloy; DIRECTIONAL SOLIDIFICATION; INTERFACE REACTION; CONTAMINATION; PARAMETERS; AL2O3; MELT;
D O I：
10.31643/2023/6445.10
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of various binding agents based on aqueous solutions of nitric acid, yttrium nitrate and orthophosphoric acid and yttrium hydroxide gel on the physical and mechanical properties of casting molds based on Y2O3 has been studied. It is shown that the most promising binding agent for yttrium oxide casting molds is a phosphate bond. The data describing the curing mechanism of phosphate-bonded molding mass is presented. The influence of the concentration of binding agent solutions on the strength characteristics of molding materials after curing and heat treatment is shown. Information about the interaction of yttrium oxide powder molds with phosphate-binding with titanium melt of VT1-0 and VT6 grades is presented. The obtained data allowed us to describe the advantages and disadvantages of the developed molding compound. A method for producing casting molds based on yttrium oxide powder with a yttrium phosphate-binding agent was developed based on this research.
引用
收藏
页码：71 / 82
页数：12
相关论文
共 50 条
  • [1] New Technological Solutions in the Manufacture of Thermochemically Resistant Ceramic Molds for Casting Titanium Alloys
    Dubrovin, V. K.
    Kulakov, B. A.
    Karpinskii, A. V.
    Zaslavskaia, O. M.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2022, 63 (06) : 641 - 648
  • [2] New Technological Solutions in the Manufacture of Thermochemically Resistant Ceramic Molds for Casting Titanium Alloys
    V. K. Dubrovin
    B. A. Kulakov
    A. V. Karpinskii
    O. M. Zaslavskaia
    Russian Journal of Non-Ferrous Metals, 2022, 63 : 641 - 648
  • [3] Research of calcium oxide based ceramic cores in titanium casting
    Xu, Xiaoqing
    Gao, Peng
    Zhou, Tietao
    MATERIALS SCIENCE AND NANOTECHNOLOGY I, 2013, 531-532 : 266 - +
  • [4] Interaction of Titanium with Ceramic Molds in the Conditions of Electron Beam Casting Technology
    Kaliuzhnyi, P.
    Voron, M.
    Mykhnian, O.
    Tymoshenko, A.
    Neima, O.
    Iangol, O.
    ARCHIVES OF FOUNDRY ENGINEERING, 2021, 21 (03) : 27 - 32
  • [5] Highly Thermostable Ceramic Molds for Shaped Castings of Titanium Alloys
    Varfolomeev, M. S.
    Moiseev, V. S.
    Shcherbakova, G. I.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2017, 58 (01) : 61 - 66
  • [6] Highly thermostable ceramic molds for shaped castings of titanium alloys
    M. S. Varfolomeev
    V. S. Moiseev
    G. I. Shcherbakova
    Russian Journal of Non-Ferrous Metals, 2017, 58 : 61 - 66
  • [7] Reaction between Ti and boron nitride based investment shell molds used for casting titanium alloys
    LIU Hongbaoa
    RareMetals, 2008, 27 (06) : 617 - 622
  • [8] Reaction between Ti and boron nitride based investment shell molds used for casting titanium alloys
    Liu Hongbao
    Shen Bin
    Zhu Ming
    Zhou Xing
    Mao Xiemin
    RARE METALS, 2008, 27 (06) : 617 - 622
  • [9] Reaction between Ti and boron nitride based investment shell molds used for casting titanium alloys
    School of Materials Science and Engineering, Shanghai University, Shanghai, 200072, China
    不详
    Rare Met, 2008, 6 (617-622):
  • [10] Ceramic dental molds for the precision casting of titanium and titanium alloys. I, relationship between particle-size distribution of aggregates and mold expansion
    Nakamura, Masahiko
    Jyohzaki, Katsuhito
    Kimura, Takatoshi
    Togaya, Toshihiro
    Ida, Kazuo
    1600, (73):
12345