Simple Configuration of a Fiber Optic Sensor for Measuring Deflection in Concrete Beams

被引：2

作者：

Camas-Anzueto, Jorge Luis ^{[1
]}

Juan-Jimenez, Ana Marcela ^{[1
]}

Anzueto-Sanchez, Gilberto ^{[2
]}

Perez-Patricio, Madain ^{[1
]}

Grajales-Coutino, Ruben ^{[1
]}

Hernandez-Gutierrez, Carlos Alberto ^{[1
]}

Alonso-Farrera, Francisco Alberto ^{[3
]}

机构：

[1] Tecnol Nacl Mexico Campus Inst Tecnol Tuxtla Guti, Postgrad Dept, Optomechatron Grp, Tuxtla Gutierrez 29050, Chiapas, Mexico

[2] Ctr Invest Opt AC, Fiber Laser Grp, Ctr Invest Opt, Guanajuato 37150, Mexico

[3] Univ Autonoma Chiapas, Fac Engn Campus 1, Dept Civil Engn, Tuxtla Gutierrez 29050, Chiapas, Mexico

来源：

IEEE SENSORS JOURNAL | 2023年 / 23卷 / 07期

关键词：

Optical fiber sensors; Optical fibers; Sensors; Optical fiber cables; Monitoring; Optical variables measurement; Optical fiber networks; Deflection measurement; enter optical fiber sensors (OFSs); optical variables measurement; BRAGG GRATING SENSORS; CURVATURE;

D O I：

10.1109/JSEN.2023.3242584

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This work proposes a simple configuration of a fiber optic sensor (FOS) used to measure deflection in concrete beams. This FOS includes pulleys with a groove to generate a constant drastic loss in the optical fiber (OF). The FOS was characterized as a function of three pulley diameters in a home-made metallic base. The FOS used a multimode (MM) OF since it demonstrated better behavior than a single-mode fiber, and the deflection caused a loss in the OF. This loss was found to be the parameter related to concrete beam deflection. In this way, we carried out characterization to find the best sensitivity. The sensitivity calculated in the laboratory tests using an MM fiber in the proposed FOS with three pulleys of 1.2 cm in diameter was -0.34785 dB/cm. Furthermore, the proposed FOS was validated in a concrete beam in real time using a 50-tons variable load actuator. Finally, the FOS installed in a concrete beam presented a dependency as a function of overload in tons. The sensitivity obtained in the test was -0.02932 dB/cm.

引用

页码：6840 / 6848

页数：9

共 50 条

[1] Fiber-Optic Instrument for Measuring the Deflection of Components
Titov, A. A.
Albagachiev, A. Yu.
MEASUREMENT TECHNIQUES, 2015, 57 (10) : 1128 - 1130
[2] Fiber-Optic Instrument for Measuring the Deflection of Components
A. A. Titov
A. Yu. Albagachiev
Measurement Techniques, 2015, 57 : 1128 - 1130
[3] Fiber Optic Sensors and Digital Image Correlation for Measuring Deformations in Reinforced Concrete Beams
Mirzazadeh, M. Mehdi
Green, Mark F.
JOURNAL OF BRIDGE ENGINEERING, 2018, 23 (03)
[4] Fiber optic 2-D sensor for measuring the strain inside the concrete specimen
Yuan, LB
Li, QB
Liang, YJ
Yang, J
Liu, ZH
SENSORS AND ACTUATORS A-PHYSICAL, 2001, 94 (1-2) : 25 - 31
[5] A FIBER OPTIC SENSOR FOR MEASURING DISTRIBUTED FORCES
HUANG, SL
LUO, F
PAN, YJ
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 1994, 5 (03) : 427 - 431
[6] Prediction of Deflection of Reinforced Concrete Beams Strengthened with Fiber Reinforced Polymer
Daugevicius, Mykolas
Valivonis, Juozas
Skuturna, Tomas
MATERIALS, 2019, 12 (09):
[7] Concrete Deflection Measurement Using Fiber Optic Distributed Strain System
Papes, Martin
Jaros, Jakub
Fajkus, Marcel
Hurta, Jan
Liner, Andrej
Hruby, David
Vasinek, Vladimir
INTERNATIONAL CONFERENCE ON PHOTONICS SOLUTIONS 2015, 2015, 9659
[8] Deflection of Steel Fiber Reinforced Concrete Beams Based on Waste Sand
Domski, Jacek
Zakrzewski, Mateusz
MATERIALS, 2020, 13 (02)
[9] A simple method for measuring dynamic phase changes in a homodyne interferometric fiber-optic sensor
Zefeng WANG
Yongming HU
Zhou MENG
Ming NI
Frontiers of Optoelectronics in China, 2009, 2 (01) : 58 - 60
[10] A simple method for measuring dynamic phase changes in a homodyne interferometric fiber-optic sensor
Wang Z.
Hu Y.
Meng Z.
Ni M.
Frontiers of Optoelectronics in China, 2009, 2 (1): : 58 - 60

← 1 2 3 4 5 →