A low computational cost optimization procedure for axial load carrying capacity of the multi-beam structure

被引:0
|
作者
Kotsmid, Stanislav [1 ]
Beno, Pavel [1 ]
机构
[1] Tech Univ Zvolen, Fac Technol, Dept Mech Mech Engn & Design, Studentska 26, Zvolen 96001, Slovakia
关键词
Optimization; Load carrying capacity; Finite element method; Buckling failure; GRADED TIMOSHENKO BEAM; BUCKLING ANALYSIS; STEEL FRAME; VIBRATION; SYSTEM;
D O I
10.1016/j.engfailanal.2022.106922
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The paper presents an improved algorithm to compute an axial load carrying capacity of the specific multi-beam structure in order to failure avoidance. The former approach based on the finite element method is reduced to determine a relation between the axial load and axial displacement for a single beam, while the time-consuming FE procedure applied on several beams is replaced with a numerical optimization process. The developed approach provides faster and simpler computation of the minimum axial load carrying capacity of the structure considering the beam length tolerances, where the results are in a good agreement with the complex FE analysis. Supporting theoretical and experimental analyses were performed to confirm the correctness of the mentioned method where the load carrying capacity of the multi-beam structure made up of six steel circular beams was analyzed.
引用
收藏
页数:10
相关论文
共 31 条
  • [1] Offered Capacity Optimization Mechanisms for Multi-beam Satellite Systems
    Alegre-Godoy, R.
    Alagha, N.
    Vazquez-Castro, M. A.
    2012 IEEE INTERNATIONAL CONFERENCE ON COMMUNICATIONS (ICC), 2012,
  • [2] Simulation of load carrying capacity of sheathed parallel timber beam structure
    Hansson, M.
    Isaksson, T.
    Journal of the Institute of Wood Science, 2006, 17 (03): : 171 - 177
  • [3] Evaluation of Low-Cost Compact Multi-beam Reflectarray Antenna
    Gomez-Alvarez, Andres
    Arrebola, Manuel
    Pino, Marcos R.
    2023 17TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, EUCAP, 2023,
  • [4] DYNAMIC LOAD CARRYING-CAPACITY OF MECHANICAL MANIPULATORS .2. COMPUTATIONAL-PROCEDURE AND APPLICATIONS
    WANG, LT
    RAVANI, B
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1988, 110 (01): : 53 - 61
  • [5] Effect of lintel on horizontal load-carrying capacity in post-beam structure
    Park C.-Y.
    Kim H.K.
    Eom C.-D.
    Kim G.-C.
    Lee J.-J.
    Journal of Wood Science, 2014, 60 (1) : 30 - 38
  • [6] Effect of lintel on horizontal load-carrying capacity in post-beam structure
    Park, Chun-Young
    Kim, HyungKun
    Eom, Chang-Deuk
    Kim, Gwang-Chul
    Lee, Jun-Jae
    Journal of Wood Science, 2014, 60 (01) : 30 - 38
  • [7] A low cost W-band multi-beam Doppler radar for automotive applications
    Rasshofer, RH
    Biebl, EM
    1997 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS I-III: HIGH FREQUENCIES IN HIGH PLACES, 1997, : 971 - 974
  • [8] Low Cost, Short Lead-time Feed Chain Components for Multi-beam Antennas
    Booth, Paul
    Skeen, Malcolm
    Stirland, Simon
    2009 3RD EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, VOLS 1-6, 2009, : 806 - 810
  • [9] A Low Computational Cost, Prioritized, Multi-Objective Optimization Procedure for Predictive Control Towards Cyber Physical Systems
    Ionescu, Clara
    Cajo Diaz, Ricardo Alfredo
    Zhao, Shiquan
    Ghita, Mihaela
    Ghita, Maria
    Copot, Dana
    IEEE ACCESS, 2020, 8 : 128152 - 128166
  • [10] Load carrying capacity numerical study of I-beam pillar structure with blast protective panel
    Mazurkiewicz, L.
    Kolodziejczyk, D.
    Damaziak, K.
    Malachowski, J.
    Klasztorny, M.
    Baranowski, P.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2013, 61 (02) : 451 - 457