FinFix: a soft gripper with contact-reactive reflex for high-speed pick and place of fragile objects

被引:2
|
作者
Heeringa, Willem [1 ]
Della Santina, Cosimo [2 ,3 ]
Smit, Gerwin [1 ]
机构
[1] Delft Univ Technol, BioMech Engn Dept, Mekelweg 2, NL-2628 CD Delft, Netherlands
[2] Delft Univ Technol, Cognit Robot Dept, Mekelweg 2, NL-2628 CD Delft, Netherlands
[3] German Aerosp Ctr DLR, Inst Robot & Mechatron, D-82234 Wessling, Germany
关键词
ROBOT;
D O I
10.1109/ROBOSOFT55895.2023.10122107
中图分类号
TP24 [机器人技术];
学科分类号
080202 ; 1405 ;
摘要
Industrial automation calls for precise tasks with cycle times reduced to the minimum. At the same time, when handling delicate products such as fruits and vegetables, accelerations must be kept low to keep interaction forces under a certain threshold to avoid damage. This trade-off hinders the penetration of automation in many relevant application fields. This paper investigates using soft technology to solve this challenge. We propose the FinFix gripper, a non-anthropomorphic soft gripper capable of handling delicate objects at high acceleration using a contact-reactive grasping approach. This gripper has two entirely passive sensorized fingers that establish contact and two active fingers that are actuated pneumatically through a rigid mechanism allowing for rapid closure. We provide exhaustive experimental validation by connecting the gripper to a delta robot. The system can reliably execute pick-and-place cycles in similar to 1 s when the distance between the pick and the place locations is 400mm, resulting in a peak speed of similar to 10m /s. None of the fragile objects used during the experiments showed any damage. The only information needed is a rough estimation of the object's position to be grasped and a contact event to trigger the reflex. The test results show that the gripper can hold fragile objects during lateral accelerations of 10 g.
引用
收藏
页数:7
相关论文
共 30 条
  • [1] SPECIAL FEATURES OF HIGH-TEMPERATURE CONTACT-REACTIVE BRAZING OF HIGH-SPEED STEEL TO STRUCTURAL-STEEL
    SHABALIN, VN
    WELDING PRODUCTION, 1975, 22 (07): : 47 - 49
  • [2] Development of a Food Handling Soft Robot Hand Considering a High-speed Pick-and-place Task
    Yamanaka, Yuta
    Katagiri, Sho
    Nabae, Hiroyuki
    Suzumori, Koichi
    Endo, Gen
    2020 IEEE/SICE INTERNATIONAL SYMPOSIUM ON SYSTEM INTEGRATION (SII), 2020, : 87 - 92
  • [3] Multi-robot coordination for high-speed pick-and-place tasks
    Yu, Chao
    Liu, Xin-Jun
    2017 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS (IEEE ROBIO 2017), 2017, : 1743 - 1750
  • [4] High-Speed Tracking Control of Parallel Kinematic Machine for Pick-and-Place
    Do, Hyun Min
    Park, Chanhun
    Kim, Byung In
    Choi, Tae Yong
    Kyung, Jin Ho
    INTELLIGENT ROBOTICS AND APPLICATIONS, PT II, 2013, 8103 : 74 - 83
  • [5] A Soft-Containing Gripper for High-Speed Handling of Breadcrumb-Coated Oysters
    Zhang, Yang
    Wang, Zhongkui
    Kutani, Keigo
    Kawamura, Sadao
    JOURNAL OF FIELD ROBOTICS, 2024,
  • [6] Computed-torque control of high-speed parallel manipulators for pick and place operation
    Xiao, MA
    Yang, ZY
    Huang, T
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2005, VOLS 1 AND 2, 2005, : 385 - 390
  • [7] Robust Grasping of a Variable Stiffness Soft Gripper in High-Speed Motion Based on Reinforcement Learning
    Zhu, Mingzhu
    Dai, Junyue
    Feng, Yu
    SOFT ROBOTICS, 2024, 11 (01) : 95 - 104
  • [8] Control of a novel linear-rotary actuator for high-speed pick-and-place application
    Teo, T.J. (tjteo@simtech.a-star.edu.sg), 1600, Institution of Engineers (Australia) (11):
  • [9] Optimal Design of a High-Speed Pick-and-Place Cable-Driven Parallel Robot
    Zhang, Zhaokun
    Shao, Zhufeng
    Wang, Liping
    Shih, Albert J.
    CABLE-DRIVEN PARALLEL ROBOTS, 2018, 53 : 340 - 352
  • [10] Integrated design of a 4-DOF high-speed pick-and-place parallel robot
    Li, Y. H.
    Ma, Y.
    Liu, S. T.
    Luo, Z. J.
    Mei, J. P.
    Huang, T.
    Chetwynd, D. G.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2014, 63 (01) : 185 - 188