Longitudinal crack on slab surface at straightening stage during continuous casting using finite element method

被引:0
|
作者
喻海良 [1 ,2 ]
刘相华 [1 ]
机构
[1] State Key Laboratory of Rolling and Automation,Northeastern University
[2] Department of Mechanical Engineering,Tsinghua University
基金
中国国家自然科学基金;
关键词
continuous casting slab; straightening; longitudinal crack; finite element method;
D O I
暂无
中图分类号
TF777 [连续铸钢、近终形铸造];
学科分类号
080602 ;
摘要
Deformation behavior of slab at the straightening stage during continuous casting was simulated by the explicit dynamic finite element method,and the stress distribution along the width direction of the slab and its change regularity at slab center during continuous casting were obtained.The influence of distribution and change of stress on the propagation of longitudinal cracks on slab surface was discussed.The results show that the tensional stress appears on slab surface at the inner arc side and the compressive stress appears on slab surface at the outer arc side at stages 6-8 in straightening zone during continuous casting.Longitudinal cracks generally appear on slab top surface and do not appear on slab bottom surface,which are also observed in industry.
引用
收藏
页码:235 / 238
页数:4
相关论文
共 50 条
  • [1] Longitudinal crack on slab surface at straightening stage during continuous casting using finite element method
    Yu Hai-liang
    Liu Xiang-hua
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2010, 17 (02): : 235 - 238
  • [2] Longitudinal crack on slab surface at straightening stage during continuous casting using finite element method
    Hai-liang Yu
    Xiang-hua Liu
    Journal of Central South University of Technology, 2010, 17 : 235 - 238
  • [3] Analysis of Heat Transfer and Straightening of Continuous Casting Slab Using 3D Finite Element Method
    Liu, Qingguo
    Zhang, Xingzhong
    Jiang, Zhengyi
    Sun, Yanchao
    Shi, Baojun
    Shen, Nuoran
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-3, 2012, 418-420 : 1698 - +
  • [4] Research on a new detection method of slab surface crack in mould during continuous casting
    Liu, Yu
    Wang, Xudong
    Sun, Yi
    Yao, Man
    Gao, Yali
    Wang, Fuwang
    Wang, Junyao
    METALLURGICAL RESEARCH & TECHNOLOGY, 2018, 115 (01)
  • [5] A VISUAL DETECTION METHOD OF LONGITUDINAL CRACK BASED ON COMPUTER IMAGE PROCESSING DURING SLAB CONTINUOUS CASTING
    Liu, Y.
    Wang, X.
    Sun, Y.
    Du, F.
    Gao, Y.
    Wang, F.
    Wang, J.
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (02) : 673 - 680
  • [6] Continuous casting slab surface crack depth measurement using sinusoidal phase grating method
    Zhang, X. L.
    Ouyang, Q.
    Peng, S.
    Zhao, L. M.
    IRONMAKING & STEELMAKING, 2014, 41 (05) : 387 - 393
  • [7] Finite element simulation of bulge deformation for slab continuous casting
    Qin Qin
    Zhenglin Yang
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 4357 - 4370
  • [8] Finite element simulation of bulge deformation for slab continuous casting
    Qin, Qin
    Yang, Zhenglin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (9-12): : 4357 - 4370
  • [9] Analysis of Secondary Cooling Solidification Process of Continuous Casting Slab Based on Finite Element Method
    Wang, Zhaofeng
    Jiang, Yuting
    PROCEEDINGS OF THE 33RD CHINESE CONTROL AND DECISION CONFERENCE (CCDC 2021), 2021, : 5035 - 5040
  • [10] The Finite Element Analysis of the Stress Field in the Core of Continuous Casting Slab
    Yin, Qiang
    Li, Gongfa
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHATRONICS, ELECTRONIC, INDUSTRIAL AND CONTROL ENGINEERING, 2015, 8 : 80 - 83