Influence of Residual Stress on Shape of Heavy-gauge,High-strength Steel Caused by Cooling Process after Hot Rolling

被引：1
|
作者：
Shui-ze WANG [1 ,2 ]
Yong-lin KANG [1 ]
Guo-ming ZHU [1 ]
Wen LIANG [2 ]
机构：
[1] School of Materials Science and Engineering,University of Science and Technology Beijing
[2] Research and Development Center,Wuhan Iron & Steel(Group)Co.,Ltd.
来源：
JournalofIronandSteelResearch(International) | 2016年 / 23卷 / 06期
基金：
中国国家自然科学基金;
关键词：
heavy-gauge; high-strength steel; non-uniform cooling; residual stress; buckling deformation;
D O I：
暂无
中图分类号：
TG142.1 [钢的组织与性能]; TG335.11 [热轧];
学科分类号：
080201 ; 080502 ; 080503 ;
摘要：
The cooling process following hot rolling has a significant effect on the shape quality of a hot-rolled strip.The temperature and stress fields in the cooling process for a 14 mm thick strip with yield strength of 500 MPa grade were analyzed by the finite element method and actual test data,and the relationship between residual stress and shape defects was described.Subsequently,the small-crown rolling process and the coil slow cooling process were investigated.The results indicate that these processes improved the shape quality of the final product significantly.
引用
收藏
页码：547 / 552
页数：6
相关论文
共 50 条
  • [1] Influence of Residual Stress on Shape of Heavy-gauge, High-strength Steel Caused by Cooling Process after Hot Rolling
    Wang, Shui-ze
    Kang, Yong-lin
    Zhu, Guo-ming
    Liang, Wen
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (06) : 547 - 552
  • [2] Influence of Residual Stress on Shape of Heavy-gauge, High-strength Steel Caused by Cooling Process after Hot Rolling
    Shui-ze Wang
    Yong-lin Kang
    Guo-ming Zhu
    Wen Liang
    Journal of Iron and Steel Research International, 2016, 23 : 547 - 552
  • [3] Effect of Cooling Mode on the Microstructure of High-Strength Steel during Hot Rolling
    Liu, Hongliang
    Du, Wenbin
    Lu, Hongzhou
    Fu, Yujing
    Yu, Shuai
    Liu, Chengjun
    METALS, 2022, 12 (07)
  • [4] A Study on Potential Strip Shape Control of High-Strength Steel during Hot Pinch Rolling Process
    Kong, Ning
    Zhao, Chuan
    Cao, Jianguo
    Zhang, Qingdong
    STEEL RESEARCH INTERNATIONAL, 2021, 92 (01)
  • [5] Effects of Cooling on Bending Process of Heavy Rail Steel After Hot Rolling
    Chen L.
    Yang M.
    Xu Y.
    Zhang Z.
    Li Z.
    Zhang F.
    Metallography, Microstructure, and Analysis, 2016, 5 (3) : 196 - 206
  • [6] Experimental and Simulation Analysis of the Successful Production of Heavy-Gauge Steel Plate by the Clad Rolling Process
    Li, Juan
    Zhao, Guanghui
    Huang, Qingxue
    Zhou, Cunlong
    Zhang, Zhanjie
    Ma, Lifeng
    INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION, 2017, 18 (05) : 403 - 409
  • [7] INFLUENCE OF MICROSTRUCTURE ON YIELDING BEHAVIOR OF HEAVY GAUGE HIGH-STRENGTH STEEL PLATES
    SHIKANAI, N
    KAGAWA, H
    KURIHARA, M
    ISIJ INTERNATIONAL, 1992, 32 (03) : 335 - 342
  • [8] INFLUENCE OF MICROSTRUCTURE ON YIELDING BEHAVIOR OF HEAVY GAUGE HIGH-STRENGTH STEEL PLATES
    SHIKANAI, N
    KAGAWA, H
    KURIHARA, M
    TAGAWA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (01): : 89 - 96
  • [9] Effect of Tempering Process on Residual Stress in Hot Rolled Low Carbon Martensite High-Strength Steel Strip
    Sun, Lin
    Zhao, Zhiyi
    Yang, Xiaozhen
    Xue, Rundong
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 222 - +
  • [10] Stress corrosion cracking of high-strength steel: influence of cyclic residual stresses
    Toribio, J
    Kharin, V
    SURFACE TREATMENT IV: COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS, 1999, 3 : 243 - 252
12345