Nb-Hf合金表面Si-Ti-Cr硅化物涂层在大气和真空中的高温热震性能（英文）

被引：1

作者：

安东阳 ^{[1
,2
]}

刘晨飞 ^{[1
]}

赵爽 ^{[1
]}

张海鹏 ^{[3
]}

唐增武 ^{[1
]}

萧鹏 ^{[2
]}

戴景民 ^{[2
]}

王亚明 ^{[3
]}

机构：

[1] 北京星航机电装备有限公司

[2] 哈尔滨工业大学仪器科学与工程学院

[3] 哈尔滨工业大学特种陶瓷研究所

来源：

稀有金属材料与工程 | 2022年 / 51卷 / 11期

关键词：

硅化物涂层; 热震性能; 热应力分布; 失效机理;

D O I：

暂无

中图分类号：

TG178 [各种金属及合金的腐蚀、防腐与表面处理];

学科分类号：

摘要：

为了提高Nb-Hf合金的高温热震性能，采用浆料烧结和高温渗透法制备了Si-Ti-Cr硅化物涂层，对比分析了Si-Ti-Cr硅化物包覆的Nb-Hf合金样品在大气和真空条件下的高温热震性能。通过模拟在热冲击过程中涂层的温度场和热应力场分布，揭示了Si-Ti-Cr涂层在大气和真空条件下的热冲击失效机理。结果表明，在1300℃热震循环100次条件下，涂层的真空失重小于0.8 mg/cm2；在1600℃热震循环200次条件下，涂层的空气增重小于3 mg/cm2。硅化物涂层在1300℃真空环境下和1600℃空气环境下具有优异的抗热震性能。

引用

页码：3974 / 3980

页数：7

共 21 条

[1] Influence of processing conditions on the properties of thermal sprayed coating: a review
Kumar, Santosh
Kumar, Rakesh
[J]. SURFACE ENGINEERING, 2021, 37 (11) : 1339 - 1372
[2] Preparation and Performance of an Abradable NiCrFeAlBN-YSZ-NiCrAl Layered Seal Coating for Aircraft Engines[J] . Xuying Cheng,Yueguang Yu,Deming Zhang,Tong Liu,Jianming Liu,Jie Shen.Journal of Thermal Spray Technology . 2020 (prep)
[3] Wear resistance of FeCoCrNiMnAl x high-entropy alloy coatings at high temperature[J] . Yan Cui,Junqi Shen,Sunusi Marwana Manladan,Keping Geng,Shengsun Hu.Applied Surface Science . 2020 (C)
[4] High temperature behaviour of NbSi＜sub＞2＜/sub＞ coating on the Nb-1Zr-0.1C alloy[J] . M. Tyagi,S. K. Ghosh,R. Tewari.Surface Engineering . 2020 (2)
[5] Hot corrosion behavior of NbSi2/SiO2-Nb2O5 multilayer coating on Nb alloy
Ge, Yulin
Wang, Yaming
Chen, Junchen
Zou, Yongchun
Guo, Lixin
Ouyang, Jiahu
Jia, Dechang
Zhou, Yu
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 767 : 7 - 15
[6] Investigation of the Oxidative Resistance of High-Temperature Coating on a SiC Material under Exposure to High-Enthalpy Flow
Kablov, E. N.
Zhestkov, B. E.
Grashchenkov, D. V.
Sorokin, O. Yu.
Lebedeva, Yu. E.
Vaganova, M. L.
[J]. HIGH TEMPERATURE, 2017, 55 (06) : 873 - 879
[7] Environmentally Resistant Mo-Si-B-Based Coatings
Perepezko, J. H.
Sossaman, T. A.
Taylor, M.
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (05) : 929 - 940
[8] Derating design for optimizing reliability and cost with an application to liquid rocket engines[J] . Kyungmee O. Kim,Taeseong Roh,Jae-Woo Lee,Ming J. Zuo.Reliability Engineering and System Safety . 2016
[9] Structure and Oxidation Behavior of Zr–Y Modified Silicide Coatings Prepared on an Nb–Ti–Si–Cr Based Ultrahigh Temperature Alloy
Xuan Li
Xiping Guo
Yanqiang Qiao
[J]. Oxidation of Metals, 2015, 83 : 253 - 271
[10] Effect of Bond Coats on Thermal Shock Resistance of Thermal Barrier Coatings Deposited Onto Polymer Matrix Composites Via Air Plasma Spray Process
Huang, Wenzhi
Zhao, Yu
Fan, Xizhi
Meng, Xiangsheng
Wang, Ying
Cai, Xiaolong
Cao, Xueqiang
Wang, Zhen
[J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, 22 (06) : 918 - 925

← 1 2 3 →