Simulation of 3D material flow in friction stir welding of AA6061-T6

被引：3
|
作者：
张昭
张洪武
机构：
[1] State Key Laboratory of Structural Analysis for Industrial Equipment Department of Engineering Mechanics
[2] Faculty of Vehicle Engineering and Mechanics
[3] Dalian University of Technology
来源：
China Welding | 2008年 / 01期
基金：
国家高技术研究发展计划(863计划);
关键词：
material flow; friction stir welding; finite element method;
D O I：
暂无
中图分类号：
TP391.9 [计算机仿真];
学科分类号：
080203 ;
摘要：
This paper reports the numerical simulation of the 3D material flow in friction stir welding process by using finite element methods based on solid mechanics.It is found that the material flow behind the pin is much faster than that in front of the pin.The material in front of the pin moves upwards and then rotates with the pin due to the effect of the rotating tool.Behind of the pin,the material moves downwards.This process of material movement is the real cause to make the friction stir welding process continuing successfully.With the increase of the translational velocity or the rotational velocity of the pin,the material flow becomes faster.
引用
收藏
页码：57 / 63
页数：7
相关论文
共 50 条
  • [1] Simulation of 3D material flow in friction stir welding of AA6061-T6
    Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology, Dalian 116024, China
    China Weld Eng Ed, 2008, 1 (57-63): : 57 - 63
  • [2] Precipitation in the Nugget Zone of AA6061-T6 by Friction Stir Welding
    Tao, Wang
    Yong, Zou
    Matsuda, Kenji
    CHIANG MAI JOURNAL OF SCIENCE, 2016, 43 (02): : 409 - 419
  • [3] Effects of bottom plate in friction stir welding of AA6061-T6
    Vinayagamoorthi, M. A.
    Prince, M.
    Balasubramanian, S.
    METALLURGICAL RESEARCH & TECHNOLOGY, 2020, 118 (01)
  • [4] Friction stir welding window for AA6061-T6 aluminium alloy
    Gadakh, Vijay S.
    Kumar, Adepu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (09) : 1172 - 1181
  • [5] Prediction of fatigue life of welding tool in friction stir welding of AA6061-T6
    Zhang, Z.
    Wu, Q.
    Zhang, H. W.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (9-12): : 3407 - 3415
  • [6] Prediction of fatigue life of welding tool in friction stir welding of AA6061-T6
    Z. Zhang
    Q. Wu
    H. W. Zhang
    The International Journal of Advanced Manufacturing Technology, 2016, 86 : 3407 - 3415
  • [7] Modeling and analysis of effect of tool geometry on temperature distribution and material flow in friction stir welding of AA6061-T6
    Manoj Kumar
    Ramesh Kumar
    Sachin D. Kore
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
  • [8] Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding
    Mahto, Raju P.
    Gupta, Chaman
    Kinjawadekar, Manan
    Meena, Abhishek
    Pal, Surjya K.
    JOURNAL OF MANUFACTURING PROCESSES, 2019, 38 : 370 - 386
  • [9] Modeling and analysis of effect of tool geometry on temperature distribution and material flow in friction stir welding of AA6061-T6
    Kumar, Manoj
    Kumar, Ramesh
    Kore, Sachin D.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2022, 44 (04)
  • [10] AXIAL FORCE REDUCTION IN FRICTION STIR WELDING OF AA6061-T6 AT RIGHT ANGLE
    Imani, Yousef
    Guillot, Michel
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
12345