Electrochemical synthesis of silver nanoparticles-coated gold nanoporous film electrode and its application to amperometric detection for trace Cr(VI)

A simple and rapid approach for the electrochemical synthesis of Ag nanoparticles-coated gold nanoporous film (AgGNF) on a gold substrate was reported. The solid gold electrode (SGE) was directly anodized under a high potential of 5 V, and then reduced to obtain gold nanoporous film (AuNF) by freshly prepared ascorbic acid. The Ag nanoparticles (AgNPs) were grown on the AuNF electrode by potential-step electrodeposition. The resulting AgGNF composites electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy and cyclic voltammetry (CV). As-prepared AgGNF electrode was used as a kind of superior sensor for Cr(VI) detection, which exhibited better electrocatalytic behavior than those of AuNF and SGE under identical conditions. Such a designed AgGNF nanocomposites electrode showed outstanding sensitivity (about 0.15 nA/ppb) and favorable reproducibility for Cr(VI) detection. The dependence of reduction current on Cr(VI) concentration is linear from 2 to 370 ppb with a low detection limit of 0.65 ppb. Interferences from other heavy metals ions (Cr3+, Cu2+, Pb2+, As3+ and Hg2+) associated with Cr(VI) analysis could be effectively diminished. The present method proves to be rapid, reliable, sensitive and low-cost.