Interfacial bonding strength of Al-Pb bearing alloy strips and hot dip aluminized steel sheets by hot rolling

被引：0
|
作者：
刘勇兵
安健
孙大仁
机构：
来源：
TransactionsofNonferrousMetalsSocietyofChina | 2000年 / 05期
关键词：
Al Pb alloy; interface; hot rolling; interfacial bonding strength;
D O I：
暂无
中图分类号：
TG113 [金相学（金属的组织与性能）];
学科分类号：
080502 ;
摘要：
Al Pb alloy strips and hot dip aluminized steel sheets were successfully bonded together by hot rolling, and the interfacial bonding strengths after rolling was evaluated by a new method. The bonding modes were studied by optical and scanning electron microscope and energy dispersive X ray analysis, and the effects of the thickness of the intermetallic layers and the Si content in hot dip aluminized layers on the interfacial bonding strength were also investigated respectively. It is found that the hot dipped steel and Al Pb alloy are bonded through blank interface bonding and block interface bonding, and the total bonding strength mainly depends on that of blank interfaces and the fraction of blank interfaces. There is a linear relationship between the total bonding strength F and the fraction of blank interfaces K b. The bonding strength varies with the Si content in the hot dipped aluminized layers on the surface of steel sheets, the fraction of blank interfaces and the rotation of the intermetallic blocks. [
引用
收藏
页码：625 / 630
页数：6
相关论文
共 50 条
  • [1] Interfacial bonding strength of Al-Pb bearing alloy strips and hot dip aluminized steel sheets by hot rolling
    Liu, YB
    An, J
    Sun, DR
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2000, 10 (05) : 625 - 630
  • [2] Interfacial bonding strength of Al-Pb bearing alloy strips and hot dip aluminized steel sheets by hot rolling
    Liu, Yong-Bing
    An, Jian
    Sun, Da-Ren
    Transactions of Nonferrous Metals Society of China (English Edition), 2000, 10 (05): : 625 - 630
  • [3] Effect of Si on the interfacial bonding strength of Al-Pb alloy strips and hot-dip aluminized steel sheets by hot rolling
    An, J
    Liu, YB
    Zhang, MZ
    Yang, B
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 120 (1-3) : 30 - 36
  • [4] Hot-roll bonding of Al-Pb bearing alloy strips and hot dip aluminized steel sheets
    An J.
    Lu Y.
    Xu D.W.
    Liu Y.B.
    Sun D.R.
    Yang B.
    Journal of Materials Engineering and Performance, 2001, 10 (2) : 131 - 135
  • [5] Hot-roll bonding of Al-Pb bearing alloy strips and hot dip aluminized steel sheets
    An, J
    Lu, Y
    Xu, DW
    Liu, YB
    Sun, DR
    Yang, B
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (02) : 131 - 135
  • [6] Bonding mechanism and strength of Al-Pballoy strips and hot dip aluminized steel sheets by hot rolling
    Lu, Y
    An, JA
    Liu, YB
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 (01) : 18 - 22
  • [7] Hot roll bonding of Al-Pb-bearing alloy strips and steel sheets using an aluminized interlayer
    An, J
    Liu, YB
    Lu, Y
    Sun, DR
    MATERIALS CHARACTERIZATION, 2001, 47 (3-4) : 291 - 297
  • [8] Alloy layer hardness of hot dip aluminized steel
    Zheng, Yiran
    Gao, Wenlu
    Yuan, Guosheng
    Jinshu Rechuli/Heat Treatment of Metals, (09): : 11 - 13
  • [9] Mechanism of bonding of Al-Pballoy strip and hot dip aluminised steel sheet by hot rolling
    An, J
    Liu, YB
    Sun, DR
    MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (04) : 451 - 454
  • [10] Microstructure and morphology of Al-Pb bearing alloy synthesized by mechanical alloying and hot extrusion
    Ran, Guang
    Zhou, Jing-En
    Xi, Shengqi
    Li, Pengliang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 419 (1-2) : 66 - 70
12345