Advanced monitoring and analysis of silicone rubber foaming process using micro-scale injection molding device

被引：0
|
作者：
Cao, Qixin [1 ,2 ]
Zhang, Jiaqiang [2 ]
Duan, Jianbin [2 ]
Fan, Yu [1 ,2 ]
Wang, Yixia [2 ]
Liu, Yu [1 ]
Lu, Ai [2 ]
Yu, Fengmei [2 ]
机构：
[1] Jiangnan Univ, Sch Mech Engn, Wuxi, Peoples R China
[2] China Acad Engn Phys, Inst Chem Mat, Mianyang, Peoples R China
来源：
MATERIALS LETTERS | 2025年 / 382卷
基金：
中国国家自然科学基金;
关键词：
Silicone rubber foams; Injection molding; Foaming process; Cavity pressure; Visualization; GROWTH;
D O I：
10.1016/j.matlet.2024.137921
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In addressing the technical challenges of efficient silicone rubber foam production, this study developed a microscale simulation device specifically for injection molding. This device enabled the comprehensive monitoring of temperature, pressure, and visualization data during the foaming process, leading to the development of a novel and detailed method for characterizing the foaming dynamics. By applying the gas law model and differential analysis, we gained a thorough understanding of the mechanisms underlying the injection molding foaming process for silicone rubber. Furthermore, we successfully fabricated silicone rubber foams with high cell density and uniformly sized cells via injection molding. These findings offer important contributions to the advancement of injection molding technology in the engineering applications of silicone rubber foams.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Process monitoring in micro-injection molding
    Kuek, Soon-Chun
    Angstadt, David C.
    PROCEEDINGS OF THE ASME INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING - 2007, 2007, : 163 - 169
  • [2] A review of liquid silicone rubber injection molding: Process variables and process modeling
    Bont, Matthew
    Barry, Carol
    Johnston, Stephen
    POLYMER ENGINEERING AND SCIENCE, 2021, 61 (02): : 331 - 347
  • [3] Analysis of micro-scale EDM process
    Katz, Z
    Tibbles, CJ
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 25 (9-10): : 923 - 928
  • [4] Analysis of micro-scale EDM process
    Z. Katz
    C.J. Tibbles
    The International Journal of Advanced Manufacturing Technology, 2005, 25 : 923 - 928
  • [5] Micro- and Nanotexturization of Liquid Silicone Rubber Surfaces by Injection Molding Using Hybrid Polymer Inlays
    Lozano-Hernandez, Nekane
    Llanos, German Perez
    Comet, Carlos Saez
    del Valle, Luis J.
    Puiggali, Jordi
    Fontdecaba, Enric
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2022, 307 (03)
  • [6] Investigation of anisotropic shrinkage in liquid silicone rubber injection molding: Process variables
    Bont, Matthew R.
    Johnston, Stephen
    POLYMER ENGINEERING AND SCIENCE, 2024, 64 (07): : 3147 - 3159
  • [7] CROSS-LINKING PROCESS OF SILICONE-RUBBER AT INJECTION-MOLDING
    NAKAMURA, T
    YOSHINO, M
    KOBUNSHI RONBUNSHU, 1991, 48 (11) : 699 - 702
  • [8] Micro-Nanostructured Silicone Rubber Surfaces Using Compression Molding
    Maghsoudi, Khosrow
    Momen, Gelareh
    Jafari, Reza
    Farzaneh, Masoud
    Carreira, Tony
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 1802 - 1807
  • [9] Microcellular foaming of polypropylene containing low glass transition rubber particles in an injection molding process
    Wang, CC
    Cox, K
    Campbell, GA
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 1996, 2 (02): : 167 - 169
  • [10] Manufacturing of micro-scale open-cell polymeric foams using the solid-state foaming process
    Li, W
    Nadella, K
    Kumar, V
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXXI, 2003, 2003, : 371 - 378
12345