Microstructure and High-Temperature Oxidation Behavior of Cold-Sprayed CoNiCrAlY Coatings Deposited by Different Propellent Gases

CoNiCrAlY coatings are widely used as typical high-temperature materials to enhance the surface performances of nickel-based superalloy materials, which can be used as bond coats in thermal barrier coatings and abradable seal coatings. In this study, high-pressure cold spray technology was used to deposit CoNiCrAlY coatings on nickel-based superalloy substrates. The microstructure characteristics and oxidation behaviors of CoNiCrAlY coatings prepared by different gas types and cold spray parameters were systematically investigated. EBSD analysis showed that the deformation of the helium coating was more distinct, and the grain size of the coating fabricated by helium was smaller than that by nitrogen as seen from the grain morphology. The high-temperature oxidation results showed that the coating oxide film thickness varied parabolically with time for both coatings after 500 h isothermal oxidation at 800 degrees C, 900 degrees C, and 1000 degrees C, and the oxidation rate of the coating after heat treatment was lower than that of the as-sprayed coating. In addition, the shrinkage of the aluminum reservoir inside the coating, the element diffusion rate, and the amount and type of oxide generation on the surface all affected the oxidation process. Additionally, the helium coating had a lower oxidation growth rate and better oxidation resistance. Therefore, cold spray can be an alternative way to fabricate high-quality CoNiCrAlY coatings.