共 1 条
Photo-assisted symmetric and asymmetric supercapacitors based on molybdenum cobalt coated bismuth vanadate photoelectrodes: All-in-one energy harvesting and storage devices
被引:0
|作者:
Renani, Atefeh Sharifi
[1
]
Hosseini, Zohreh
[1
]
Eberhart, Denis
[2
,3
]
Maijenburg, A. Wouter
[2
,3
]
Momeni, Mohamad Mohsen
[1
]
机构:
[1] Isfahan Univ Technol, Dept Chem, Esfahan 8415683111, Iran
[2] Martin Luther Univ Halle Wittenberg, Inst Chem, Inorgan Chem, Kurt Mothes Str 2, D-06120 Halle, Germany
[3] Martin Luther Univ Halle Wittenberg, Ctr Innovat Competence SiLi Nano, Karl Freiherr von Fritsch Str 3, D-06120 Halle, Germany
关键词:
Photorechargeable supercapacitors;
Molybdenum-cobalt;
Bismuth vanadate;
Electrodeposition;
PHOTOCAPACITOR;
PERFORMANCE;
HYBRID;
PHOTOCATALYST;
CAPACITORS;
CONVERSION;
BATTERIES;
VOLTAGE;
D O I:
10.1016/j.jpowsour.2025.236687
中图分类号:
O64 [物理化学(理论化学)、化学物理学];
学科分类号:
070304 ;
081704 ;
摘要:
In this paper, we developed photoresponsive heterogeneous interfaces between bismuth vanadate (BiVO4) and molybdenum cobalt (MoCo) to improve the performance of photo-assisted supercapacitors. We measured the areal capacitance under both dark and illuminated conditions using cyclic voltammetry and galvanostatic charge-discharge. An increase in areal capacitance of approximately 50 %-275 % was observed for prepared samples with different Mo:Co ratios under illumination, measured by galvanostatic charge-discharge (GCD) at 0.02 mA/cm2. The optimal MoCo@BiVO4 electrode showed a favorable energy storage capacity of 725 mF/cm2 when irradiated with a xenon lamp. In addition, we have developed novel photochargeable supercapacitors using MoCo@BiVO4 electrodes as dual functional materials, focusing on the fabrication of symmetric and asymmetric photosupercapacitors using MoCo@BiVO4 and graphite sheets (GS) as electrode materials. We then investigated their supercapacitive performance in a polyvinyl alcohol (PVA)-potassium chloride (KCl) gel polymer electrolyte. These photochargeable supercapacitors show a capacitance of 136 mF/cm2 and 240 mF/cm2 at 0.15 mA/cm2 under dark and light illumination, respectively. In addition, the energy density of the fabricated devices increased from 4.5 mWh/cm2 to 15 mWh/cm2 (for symmetric supercapacitors) and from 153 mWh/cm2 to 270 mWh/cm2 (for asymmetric supercapacitors) at a power density of 0.15 mW/cm2 under light.
引用
收藏
页数:13
相关论文