Experimental and computational investigation of the regional endwall cooling performance considering influences of film holes layouts and purge slot shape

被引：1
|
作者：
Du, Kun [1 ,2 ]
Pei, Xiangpeng [1 ]
Liang, Tingrui [3 ]
Wang, Haichao [1 ]
Liu, Cunliang [1 ,2 ]
Sunden, Bengt [4 ]
机构：
[1] Northwestern Polytech Univ, Sch Power & Energy, Xian 710072, Peoples R China
[2] Northwestern Polytech Univ, Shaanxi Key Lab Thermal Sci Aeroengine Syst, Xian 710129, Peoples R China
[3] China North Vehicle Res Inst, Beijing 100072, Peoples R China
[4] Lund Univ, BS Heat Transfer & Fluid Flow, Angelholm, Sweden
来源：
THERMAL SCIENCE AND ENGINEERING PROGRESS | 2025年 / 59卷
基金：
中国国家自然科学基金;
关键词：
Film cooling; Film holes layouts; Pressure Sensitive Paint; Purge slot shaping; Synergistic cooling;
D O I：
10.1016/j.tsep.2025.103333
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In the present study, the turbine endwall cooling performance was investigated using pressure sensitive paint technology. The optimized design of the film hole layout and slot shape were determined to improve the endwall cooling performance. Finally, the modified slot outlet was combined with the optimized film hole layout to achieve a better cooling performance. Results showed that the optimized film hole layout effectively enhanced the endwall cooling performance. Compared with the baseline layout, the excessive cooling on the suction side endwall was suppressed. Secondly, the coolant distribution at the slot outlet was significantly altered with the introduction of the modified outlet slot. Finally, the synergistic structures had little effect on the improvement of endwall cooling effectiveness at low coolant mass flows. The synergistic structures yielded better film cooling performances with high coolant mass flows.
引用
收藏
页数：15
相关论文
共 30 条
  • [1] Experimental Investigation of Film Cooling Performance on Blade Endwall With Diffusion Slot Holes and Stator-Rotor Purge Flow
    Yu, Zhiqiang
    Liu, Jianjun
    Li, Chen
    An, Baitao
    Xu, Guangyao
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2021, 143 (05):
  • [2] EXPERIMENTAL INVESTIGATION OF FILM COOLING PERFORMANCE ON BLADE ENDWALL WITH DIFFUSION SLOT HOLES AND STATOR-ROTOR PURGE FLOW
    Yu, Zhiqiang
    Liu, Jianjun
    Li, Chen
    An, Baitao
    Xu, Guangyao
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 7B, PT I, 2020,
  • [3] EXPERIMENTAL STUDY ON THE EFFECTS OF SLOT JET ON FILM COOLING PERFORMANCE IN THE CASCADE ENDWALL WITH PURGE FLOW
    Yao Yunjia
    Zhu Peiyuan
    Tao Zhi
    Song Liming
    Li Jun
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5B, 2019,
  • [4] Endwall film cooling performance considering the effects of micro-riblets configurations and layouts
    Du, Kun
    Pei, Xiangpeng
    Li, Yuanyong
    Liu, Cunliang
    Sunden, Bengt
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2024, 108
  • [5] Experimental Study on the Effect of Purge Flow on Film Cooling Performance of an Annular Cascade Endwall
    Zhu P.
    Tao Z.
    Yao Y.
    Song L.
    Li J.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2019, 53 (11): : 63 - 70
  • [6] Experimental Study on the Effect of the Locations of Slot Jet on Film Cooling Performance of Endwall
    Yao, Yun-Jia
    Zhu, Pei-Yuan
    Chen, Yun
    Song, Li-Ming
    Li, Jun
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40 (10): : 2327 - 2333
  • [7] Computational investigation of film cooling from cylindrical and row trenched cooling holes near the combustor endwall
    Kianpour, Ehsan
    Sidik, Nor Azwadi Che
    CASE STUDIES IN THERMAL ENGINEERING, 2014, 4 : 76 - 84
  • [8] Experimental and Numerical Investigation on the Film Cooling of Waist-Shaped Slot Holes Comparing With Converging Slot Holes
    Liu, Cun-Liang
    Zhu, Hui-Ren
    Bai, Jiang-Tao
    Xu, Du-Chun
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (01):
  • [9] Non-axisymmetric Endwall film cooling characteristics considering the influences of cylindrical holes and laidback fan-shaped holes
    Du, Kun
    Jia, Yihao
    Liu, Cunliang
    Sunden, Bengt
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 225
  • [10] Improving Turbine Endwall Overall Cooling Effectiveness Using Curtain Cooling and Redistributed Film-Hole Layouts: An Experimental and Computational Study
    Wu, Hang
    Yang, Xing
    Zhao, Qiang
    Feng, Zhenping
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2024, 16 (03)
123