Research on the microwave pyrolysis behavior of automotive shredder residue

被引:0
|
作者
Zhang, Hongshen [1 ]
Chen, Tianyi [1 ]
Wei, Guoliang [1 ]
Pan, Guanghao [1 ]
Cao, Zhaoqi [1 ]
机构
[1] Kunming Univ Sci & Technol, Fac Mech & Elect Engn, 727 Jingming South Rd, Kunming 650500, Yunnan, Peoples R China
基金
中国国家自然科学基金;
关键词
Automotive shredder residue; Microwave pyrolysis; Thermal analysis kinetics; Pyrolysis products;
D O I
10.1007/s10163-024-02127-x
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The recycling of end-of-life automobiles has become one of the most important issues facing various countries. At present, the main approach to processing these automobiles involves recycling, which, after dismantling and crushing, creates residual materials known as automotive shredder residue (ASR). ASR is mainly recycled through incineration or landfill disposal, which can cause environmental pollution and waste of resources. Pyrolysis, an emerging ASR treatment method, is widely considered an ideal alternative. While traditional electric pyrolysis has the advantages of high energy consumption and low heating rate, microwave pyrolysis offers higher heating coefficient, lower energy consumption, and greater environmental protection. Therefore, based on the microwave pyrolysis technology, this work investigates the thermal analysis kinetics and pyrolysis of whole components of ASR. The results revealed that the average activation energy of ASR reached 93.476 kJ/mol, as calculated using the Flynn-Wall-Ozawa (FWO) method, and the reaction model was close to the diffusion-control model. Furthermore, the residence time and heating temperature have a great influence on the product composition and yield and affect the occurrence of secondary reactions, and the microwave power influences the rate of ASR cracking and the rate of energy transfer of the products, in which the microwave power has the greatest influence on the gaseous products. The H2 content increased from 1.097 to 2.565 wt.%, while the methane content increased from 0.781 to 2.687 wt.%. Moreover, the yield of aromatic hydrocarbons in the liquid product increased with the increase of residence time, and the aromatic hydrocarbon product content increased from 31.67 to 44.39 wt.%. Finally, the increase in heating temperature decreased the yield of aromatic hydrocarbons in liquid products, while the increase of microwave power initially decreased and then increased the yield of aromatic hydrocarbons in liquid products. The findings of this work provide theoretical and experimental references for ASR microwave pyrolysis.
引用
收藏
页码:446 / 463
页数:18
相关论文
共 50 条
  • [1] A critical review of developments in the pyrolysis of automotive shredder residue
    Harder, Marie K.
    Forton, Osric Tening
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2007, 79 (1-2) : 387 - 394
  • [2] Pollutant formation in the pyrolysis and combustion of Automotive Shredder Residue
    Rey, Lorena
    Conesa, Juan A.
    Aracil, Ignacio
    Garrido, Maria A.
    Ortuno, Nuria
    WASTE MANAGEMENT, 2016, 56 : 376 - 383
  • [3] Pyrolysis of automotive shredder residue in a bench scale rotary kiln
    Notarnicola, Michele
    Cornacchia, Giacinto
    De Gisi, Sabino
    Di Canio, Francesco
    Freda, Cesare
    Garzone, Pietro
    Martino, Maria
    Valerio, Vito
    Villone, Antonio
    WASTE MANAGEMENT, 2017, 65 : 92 - 103
  • [4] Pyrolysis of automotive shredder residue (ASR) - Influence of temperature on the distribution of products
    Rausa, R
    Pollesel, P
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 1997, 40-1 : 383 - 401
  • [5] Pyrolysis of automotive shredder residue (ASR) influence of temperature on the distribution of products
    Rausa, R.
    Pollesel, P.
    Journal of Analytical and Applied Pyrolysis, 1997, 40-41 : 383 - 401
  • [6] Characterizing automotive shredder residue
    Automotive Engineering (Warrendale, Pennsylvania), 1998, 106 (09):
  • [7] A Study on Pyrolysis of Pretreated Automotive Shredder Residue-Thermochemical Calculations and Experimental Work
    Vijayan, Sandhya Kuruvalan
    Kibria, Mahmud Arman
    Bhattacharya, Sankar
    FRONTIERS IN SUSTAINABILITY, 2022, 3
  • [8] Pyrolysis of automotive shredder residue light fraction: maximization of the tar yield using design of experiment
    Anzano, Manuela
    Collina, Elena
    Piccinelli, Elsa
    Lasagni, Marina
    2017 INTERNATIONAL SYMPOSIUM ON RESOURCE EXPLORATION AND ENVIRONMENTAL SCIENCE (REES 2017), 2017, 64
  • [9] Valorization of automotive shredder residue in building materials
    Péra, J
    Ambroise, J
    Chabannet, M
    CEMENT AND CONCRETE RESEARCH, 2004, 34 (04) : 557 - 562
  • [10] Modeling the thermal decomposition of automotive shredder residue
    Juan A. Conesa
    Lorena Rey
    Ignacio Aracil
    Journal of Thermal Analysis and Calorimetry, 2016, 124 : 317 - 327