Quantitative Phase Analysis of the FSW Joints of Al–Cu–Li and Al–Cu–Mg Alloys

被引：0

作者：

Gordeeva, M.I. ^{[1
]}

Zuiko, I.S. ^{[2
]}

Betsofen, S. Ya. ^{[1
]}

Mironov, S. Yu. ^{[2
]}

Wu, R. ^{[3
]}

Maksimenko, E.I. ^{[1
]}

Prokopenko, D.A. ^{[1
]}

机构：

[1] Moscow Aviation Institute (National Research University), Moscow,125993, Russia

[2] Belgorod State National Research University, Belgorod,308015, Russia

[3] Harbin University of Engineering, Harbin,150001, China

来源：

Russian Metallurgy (Metally) | 2024年 / 2024卷 / 03期

关键词：

Aluminum compounds - Aluminum copper alloys - Copper - Copper compounds - Crystal lattices - Friction welding - Lithium alloys - Lithium compounds - Vanadium alloys;

D O I：

10.1134/S0036029524701015

中图分类号：

学科分类号：

摘要：

Abstract: Quantitative phase analysis methods are analyzed in relation to the friction stir welding (FSW) joints of a V-1469 alloy (Al–Cu–Li system) and an AA2519 alloy (Al–Cu–Mg system). For Al–Cu–Mg alloys, a method is proposed to estimate the amount of metastable (θ', θ) phases as the difference between the total fraction of all copper-containing phases and the amount of the equilibrium θ phase, which are determined by measuring the lattice parameter of the solid solution and a stereological procedure, respectively. Quantitative ratios of intermetallic phases in FSW joint zones are found for both alloys. The lower strength in the weld zone is shown to be caused by a relative decrease in the concentration of intermetallics with the highest strengthening effect in this zone compared to the base metal. These intermetallic compounds are found to be the θ' (Al2Cu) phase in the A2519 alloy and the T1 (Al2CuLi) phase in the V-1469 alloy. © Pleiades Publishing, Ltd. 2024.

引用

页码：609 / 616

页数：7

共 50 条

[1] Quantitative Phase Analysis of Al-Mg-Li and Al-Cu-Li Alloys
Betsofen, Sergey
Chizhikov, Mihail
ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 915 - 920
[2] CASTABILITY OF AL-LI-MG AND AL-LI-CU-MG ALLOYS
TONG, CH
YAO, LG
NIEH, CY
CHANG, CP
HSU, SE
JOURNAL DE PHYSIQUE, 1987, 48 (C-3): : 117 - 122
[3] Weldability of Al-Li-Cu-Mg alloys
Blazy, F.
Canaby, J.L.
Materiaux et Techniques, 1988, 76 (11-12): : 7 - 15
[4] Al–Cu–Li and Al–Mg–Li alloys: Phase composition, texture, and anisotropy of mechanical properties (Review)
Betsofen S.Y.
Antipov V.V.
Knyazev M.I.
Russian Metallurgy (Metally), 2016, 2016 (4) : 326 - 341
[5] Phase Transformations on Aging of Al-Li-Cu-Mg-(Zr) Alloys
Alekseev, A. A.
Anan'ev, V. N.
Ber, L. B.
Shestakov, A. D.
Physics of Metals and Metallography, 1994, 77 (04):
[6] Transformation diagrams of aluminum alloys of the Al-Cu-Mg, Al-Mg-Si-Cu, and Al-Mg-Li systems
Ber, LB
Kaputkin, EY
PHYSICS OF METALS AND METALLOGRAPHY, 2001, 92 (02): : 199 - 209
[7] Transformation diagrams of aluminum alloys of the Al-Cu-Mg, Al-Mg-Si-Cu, and Al-Mg-Li systems
Ber, L.B.
Kaputkin, E.Ya.
Fizika Metallov i Metallovedenie, 2001, 92 (02): : 101 - 111
[8] CONSTITUTION OF AL RICH ALLOYS OF AL-CU-MG-LI SYSTEM
LAWSONJACK, SG
FLOWER, HM
WEST, DRF
MATERIALS SCIENCE AND TECHNOLOGY, 1993, 9 (07) : 562 - 571
[9] Aging kinetics of friction stir welded Al-Cu-Li-Mg-Ag and Al-Cu-Li-Mg alloys
Sidhar, Harpreet
Mishra, Rajiv S.
MATERIALS & DESIGN, 2016, 110 : 60 - 71
[10] ON THE NUCLEATION AND GROWTH OF AL2CUMG (S') IN AL-LI-CU-MG AND AL-CU-MG ALLOYS
RADMILOVIC, V
THOMAS, G
SHIFLET, GJ
STARKE, EA
SCRIPTA METALLURGICA, 1989, 23 (07): : 1141 - 1146

← 1 2 3 4 5 →