Cryogenic fracture toughness of high manganese steel joint and 7 %Ni steel joint welded with nickel-based filler metal

被引：0
|
作者：
Cai, Xiaotao [1 ,2 ]
Qi, Yanchang [1 ]
Zhu, Haiyang [2 ]
Yao, Liu [2 ]
Wei, Jinshan [1 ]
Ma, Chengyong [1 ]
Ge, Qilu [1 ]
机构：
[1] Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China
[2] Jiangsu Univ Sci & Technol, Suzhou Inst Technol, Zhangjiagang 215600, Peoples R China
来源：
MATERIALS LETTERS | 2024年 / 377卷
关键词：
High manganese steel; 7%Ni steel; Welding; Deformation and fracture; Microstructure; CTOD;
D O I：
10.1016/j.matlet.2024.137429
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The high manganese steel (HMS) joint and 7 %Ni steel joint were fabricated using ENiCrMo-6 nickel-based electrodes. The cryogenic fracture toughness of both joints was investigated by Crack Tip Opening Displacement (CTOD) tests at 77 K. The results showed that the fracture toughness of both joints satisfied DNV requirements of 0.15 mm. The CTOD values of weld metal (WM) and heat affected zone (HAZ) in HMS joint were approximately 36.5 % and 33.5 % lower than those of corresponding areas in 7 %Ni steel joint, respectively. In the HMS joint, the presence of more large-sized precipitates in WM and segregations in HAZ had negative effects on the fracture toughness. Compared to other test locations, the HAZ of 7 %Ni steel joint contained local hard-brittle zones, resulting in more discrete CTOD values.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] The Microstructure and Microscopic Mechanical Performance of Welded Joint for 9%Ni Steel Using Nickel-Based Filler Metal
    Li, Xiaoquan
    Chen, Yixing
    Hao, Benxing
    Han, Yujun
    Chu, Yajie
    Zhang, Jianzhong
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2021, 24 (05):
  • [2] On Copper-Steel Joint Arc Welded With Nickel Based Filler
    Velu, M.
    Bhat, Sunil
    PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2100 - 2103
  • [3] Significance of fracture toughness for linear friction welded joint of weathering steel
    Shimizu, Kazuma
    Nakayama, Shota
    Shoji, Hiroto
    Kawakubo, Takumi
    Nagira, Tomoya
    Ohata, Mitsuru
    Fujii, Hidetoshi
    WELDING IN THE WORLD, 2025, 69 (03) : 739 - 750
  • [4] Effect of High-Temperature Exposure on Low-Carbon Steel Welded Joint Metal Fracture Toughness
    S. A. Nikulin
    S. O. Rogachev
    V. A. Belov
    N. V. Shplis
    V. Yu. Turilina
    L. V. Fedorenko
    A. V. Molyarov
    D. Yu. Ozherelkov
    Metallurgist, 2023, 67 : 938 - 946
  • [5] Effect of High-Temperature Exposure on Low-Carbon Steel Welded Joint Metal Fracture Toughness
    Nikulin, S. A.
    Rogachev, S. O.
    Belov, V. A.
    Shplis, N. V.
    Turilina, V. Yu.
    Fedorenko, L. V.
    Molyarov, A. V.
    Ozherelkov, D. Yu.
    METALLURGIST, 2023, 67 (7-8) : 938 - 946
  • [6] MECHANICAL PROPERTIES AND FRACTURE TOUGHNESS OF 9%Ni STEEL AND ITS WELDED JOINT ON LNG CARRIER.
    Toyosada, Masahiro
    1600, (40):
  • [7] Determination of lower bound fracture toughness of a high strength low alloy steel welded joint
    Gubeljak, N
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (02) : 252 - 258
  • [8] Analysis of microstructure and properties and nanoindentation of nickel-based alloy heterogeneous fusion welded 9Ni steel joint
    Chen, Yixin
    Li, Xiaoquan
    Hao, Benxing
    Yun, Yeling
    Du, Yongqin
    Hanjie Xuebao/Transactions of the China Welding Institution, 2021, 42 (05): : 90 - 96
  • [9] Fracture toughness of the materials in welded joint of X80 pipeline steel
    Yang, Yonghe
    Shi, Lei
    Xu, Zhen
    Lu, Hongsheng
    Chen, Xu
    Wang, Xin
    ENGINEERING FRACTURE MECHANICS, 2015, 148 : 337 - 349
  • [10] Effects of hydrogen and specimen thickness on fracture toughness of ferritic steel welded joint
    Li, Xiaogang
    Nie, Junfeng
    Wang, Xin
    Zhang, Haiquan
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 82 : 11 - 24
12345