Modeling and analysis of hybrid bonded-bolted joining in large-scale aircraft assembly

被引：0
|
作者：
Eliseev, Artem [1 ]
Lupuleac, Sergey [1 ]
Shinder, Julia [1 ]
Grigor’ev, Boris [1 ]
Khashba, Valeriia [1 ]
机构：
[1] Institute of Physics and Mechanics, Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya, 29, St. Petersburg,195251, Russia
来源：
International Journal of Advanced Manufacturing Technology | 2024年
关键词：
Hybrid bonded-bolted (HBB) joining is common method used in aircraft assembly; particularly for critical junctions such as the wing-to-fuselage joint; to ensure both quality and durability. Accurate simulation of HBB joining presents a significant challenge; as it requires a proper description of the contact interaction of the assembled parts; the flow of adhesive used for bonding; and their mutual influence. In this paper; the process of HBB joining of the upper wing panel and fuselage of a commercial aircraft is simulated. The utilized mathematical model is comprehensive in several ways. Firstly; it covers all the most important physical phenomena determining the intermediate and final result of the assembly process; notably including the two-way fluid-structure interaction and the presence of a free surface in the fluid part. Secondly; the finite element model of the joint has dimensions and level of detail comparable to models used in industrial applications. Finally; the complete sequence of assembly stages is reproduced during the simulation; including the installation of temporary fasteners and their replacement by permanent ones. The paper focuses on investigating the problem of permanent fasteners loosening; a critical issue in aircraft assembly. The state-of-the-art aircraft assembly technologies typically include requirements intended to prevent significant loosening of permanent fasteners by the end of the assembly process. The validity of these requirements is studied using a series of numerical tests with a specially developed simulation tool. Three distinct fastening installation scenarios during the multistage wing-to-fuselage assembly process were considered. The simulation results were analyzed and compared in terms of permanent fastener loosening. © The Author(s); under exclusive licence to Springer-Verlag London Ltd; part of Springer Nature 2024;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Article in Press
引用
收藏
相关论文
共 50 条
  • [1] Modeling and analysis of hybrid bonded-bolted joining in large-scale aircraft assembly
    Eliseev, Artem
    Lupuleac, Sergey
    Shinder, Julia
    Grigor'ev, Boris
    Khashba, Valeriia
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 135 (11-12): : 5715 - 5731
  • [2] Experimental study of bonded, bolted, and hybrid bonded-bolted single lap shear joints with woven CFRP adherends
    Damghani, Mahdi
    Khan, Mohammad Saad
    Atkinson, Gary A.
    COMPOSITE STRUCTURES, 2024, 334
  • [3] Impact of joint geometries in bonded-bolted hybrid joints for steel construction
    Yokozeki, Koichi
    Evers, Tobias
    Vallee, Till
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2023, 211
  • [4] Damage Analysis of CFRP Hybrid Bonded-Bolted Joint during Insertion of Interference-Fit Bolt
    Yan, Long
    Jiang, Ruisong
    Zuo, Yangjie
    MATERIALS, 2023, 16 (10)
  • [5] Failure mechanism of carbon fiber reinforced polymer bonded-bolted hybrid connection
    Liu L.
    Duan K.
    Xu Z.
    Feng Z.
    Lin Y.
    Zheng Y.
    Song X.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (01):
  • [6] Mechanical characterization of a flexible epoxy adhesive for the design of hybrid bonded-bolted joints
    Lim, Gyu-Hyeong
    Heidari-Rarani, Mohammad
    Bodjona, Kobye
    Raju, Karthik Prasanna
    Romanov, Valentin
    Lessard, Larry
    POLYMER TESTING, 2019, 79
  • [7] A Multiscale Modeling and Experimental Study on the Tensile Strength of Plain-Woven Composites with Hybrid Bonded-Bolted Joints
    Shi, Jianwei
    Zhang, Junwei
    Du, Kou
    Guo, Qiming
    Hou, Yuliang
    Dong, Cheng
    POLYMERS, 2024, 16 (14)
  • [8] Effects of structural parameters on the load distribution unevenness in CFRP hybrid bonded-bolted joint
    Shi, Jianwei
    Yang, Xiaodong
    Du, Kou
    Guo, Qiming
    Bai, Zhaohui
    POLYMER COMPOSITES, 2024,
  • [9] Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints
    Bodjona, Kobye
    Fielding, Sean
    Heidari-Rarani, Mohammad
    Lessard, Larry
    COMPOSITE STRUCTURES, 2021, 261
  • [10] Modeling and flight control of large-scale morphing aircraft
    Seigler, Thomas M.
    Neal, David A.
    Bae, Jae-Sung
    Inman, Daniel J.
    Journal of Aircraft, 1600, 44 (04): : 1077 - 1087
12345