Failure statistics of an oxide-oxide ceramic composite

被引：0
|
作者：
Ye, Pei [1 ]
Hemann, John H. [1 ]
Sandifer, Jerry B. [1 ]
机构：
[1] Cleveland State Univ, Cleveland, United States
来源：
Ceramic Engineering and Science Proceedings | 1994年 / 15卷 / 04期
关键词：
Alumina - Bending (deformation) - Ceramic materials - Failure analysis - Loads (forces) - Nonmetallic matrix composites - Parameter estimation - Shear strength - Tensile testing - Torque - Torsion testing - Torsional stress;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An alumina fiber-alumina matrix-tin oxide fiber coating oxide-oxide filament wound ceramic composite was tested under tensile and torque loads to determine the longitudinal and transverse tensile and the in-plane shear ultimate strength Weibull parameters. Nineteen flat longitudinal tensile tests, twenty-four tubular transverse tensile tests and thirty-one tubular torsion shear tests were conducted to yield Weibull parameters of 10.33, 7.68 and 2.86, respectively. The considerable scatter, as reflected by the low Weibull parameters is, in part, believed to be due to the presence of several failure modes and specimen bending. A complete characterization of the ceramic composite as a transversely isotropic material is presented using additional longitudinal and transverse compression data and stiffness data.
引用
收藏
页码：483 / 490
相关论文
共 50 条
  • [1] Oxide-oxide ceramic composite shields aircraft parts from heat
    不详
    ADVANCED MATERIALS & PROCESSES, 2008, 166 (07): : 11 - 12
  • [2] Mechanical investigation of weak regions in a wound oxide-oxide ceramic matrix composite
    Vasechko, Viacheslav
    Flucht, Ferdinand
    Rahner, Nils
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (15) : 5192 - 5199
  • [3] EFFECTS OF FREQUENCY ON FATIGUE BEHAVIOR OF AN OXIDE-OXIDE CERAMIC COMPOSITE AT 1200°C
    Hetrick, G.
    Wrenn, M. B. Ruggles
    Baek, S. S.
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES III, 2008, 28 (02): : 119 - +
  • [4] EFFECTS OF TEMPERATURE AND STEAM ENVIRONMENT ON CREEP BEHAVIOR OF AN OXIDE-OXIDE CERAMIC COMPOSITE
    Braun, J. C.
    Ruggles-Wrenn, M. B.
    MECHANICAL PROPERTIES AND PROCESSING OF CERAMIC BINARY,TERNARY, AND COMPOSITE SYSTEMS, 2009, 29 (02): : 151 - 166
  • [5] Effects of frequency and environment on fatigue behavior of an oxide-oxide ceramic composite at 1200 °C
    Ruggles-Wrenn, M. B.
    Hetrick, G.
    Baek, S. S.
    INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (03) : 502 - 516
  • [6] Preparation and characterization of an oxide-oxide continuous fiber reinforced ceramic matrix composite with a zinc oxide interphase
    Poges, Shannon
    Monteleone, Chris
    Petroski, Kenneth
    Richards, Gavin
    Suib, Steven L.
    CERAMICS INTERNATIONAL, 2017, 43 (18) : 17121 - 17127
  • [7] Recent advances in oxide-oxide composite technology
    Evans, AG
    Marshall, DB
    Zok, F
    Levi, C
    ADVANCED COMPOSITE MATERIALS, 1999, 8 (01) : 17 - 23
  • [8] A Dielectric Sensing Approach for Controlling Matrix Composition During Oxide-Oxide Ceramic Composite Processing
    Hass, D. D.
    Wadley, H. N. G.
    JOURNAL OF NONDESTRUCTIVE EVALUATION, 2011, 30 (02) : 81 - 90
  • [9] High-temperature performance and retained strength of an oxide-oxide continuous fibre ceramic composite
    Jenkins, MG
    Kohles, SS
    22ND ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: A, 1998, 19 (03): : 317 - 325
  • [10] Compressive creep behavior of an oxide-oxide ceramic composite with monazite fiber coating at elevated temperatures
    Jackson, P. R.
    Ruggles-Wrenn, M. B.
    Baek, S. S.
    Keller, K. A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 (590-601): : 590 - 601
12345