Experimental study on noise control of a centrifugal blower using tooth shape vane

被引:0
|
作者
Lu, X. [1 ]
机构
[1] Jilin University, Jilin, China
关键词
D O I
暂无
中图分类号
学科分类号
摘要
The mechanism of noise decreasing of a centrifugal blower by tooth shape vane was studied in this text. The experiments showed that the effect of tooth shape vane on noise decreasing was related to the vortex state of airflow in vane passage. For Reynolds number Re=4×105 [similar to] 6×105, a better effect of noise decreasing was obtained corresponding to the noise decreasing 4 [similar to] 5 dB. Beyond the above values of Reynolds number, the tooth shape Vane didn't act on noise decreasing at all. At tooth distance t=b/5 and tooth altitude h=b/10 the level of noise reached 2.5 dB decreased by 2.3%. However, its average kept constant and the average efficiency decreased by only 1.5%.
引用
收藏
页码:86 / 88
相关论文
共 50 条
  • [1] SOME EXPERIMENTAL STUDIES ON CENTRIFUGAL BLOWER NOISE.
    Krishnappa, G.
    Noise Control Engineering, 1979, 12 (02): : 82 - 90
  • [2] EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE AERODYNAMIC NOISE RADIATED FROM A CENTRIFUGAL BLOWER
    Chen, Jiandong
    Sun, Beibei
    Zhang, Jianrun
    Xue, Fei
    Liu, Xin
    PROCEEDINGS OF INTERNOISE/ASME NCAD NOISE CONTROL AND ACOUSTICS DIVISION CONFERENCE, 2015, 2015,
  • [3] Experimental investigation on unstable flow in multi-stage centrifugal blower with inlet guide vane
    Hiradate, Kiyotaka
    Sakamoto, Kiyohide
    Shinkawa, Yasushi
    Joukou, Satoshi
    Uchiyama, Takeshi
    JOURNAL OF FLUID SCIENCE AND TECHNOLOGY, 2016, 11 (02):
  • [4] EXPERIMENTAL INVESTIGATION ON UNSTABLE FLOW IN MULTI-STAGE CENTRIFUGAL BLOWER WITH INLET GUIDE VANE
    Hiradate, Kiyotaka
    Sakamoto, Kiyohide
    Kanno, Toshio
    Shinkawa, Yasushi
    Joukou, Satoshi
    Suzuki, Katsunari
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2013, VOL 1B: SYMPOSIA, 2014,
  • [5] Experimental and theoretical study of a vane pass frequency for a centrifugal pump
    Abu-Hamdeh, Nidal H.
    ARCHIVE OF MECHANICAL ENGINEERING, 2019, 66 (01) : 59 - 71
  • [6] Experimental Study on Series Operation of Sliding Vane Pump and Centrifugal Pump
    Li, Tao
    Zhang, Weiming
    Jiang, Ming
    Li, Zhengyang
    INTERNATIONAL JOURNAL OF ROTATING MACHINERY, 2013, 2013
  • [7] Study on Mechanical Automation with Noise Characteristic and Control of Blower Room
    Liu, Huan
    Cui, Han
    ADVANCED RESEARCH ON AUTOMATION, COMMUNICATION, ARCHITECTONICS AND MATERIALS, III, 2013, 738 : 191 - 194
  • [8] Noise reduction and surge margin improvement using tapered diffuser vane in a centrifugal compressor
    Takashi Goto
    Eri Ohmoto
    Yutaka Ohta
    Eisuke Outa
    Journal of Thermal Science, 2010, 19 : 21 - 25
  • [9] Noise Reduction and Surge Margin Improvement Using Tapered Diffuser Vane in a Centrifugal Compressor
    Takashi Goto
    Eri Ohmoto
    Yutaka Ohta
    Eisuke Outa
    JournalofThermalScience, 2010, 19 (01) : 21 - 25
  • [10] Experimental study on the influence of diffuser and inlet guide vane for the performance of centrifugal compressor
    Zhou, L.
    Xi, G.
    Cai, Y.
    EXPERIMENTAL TECHNIQUES, 2008, 32 (05) : 26 - 33