INCREASING THE FATIGUE STRENGTH OF LOADED HOLES BY DIMPLING.

被引：0
|
作者：
Shewchuk, J.
Roberts, F.A.
机构：
来源：
American Society of Mechanical Engineers (Paper) | 1974年 / 74 -Mat-P期
关键词：
MATERIALS TESTING - Residual Stresses - METALS AND ALLOYS - Fatigue - STRUCTURAL DESIGN - Prestressing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new approach to improving the fatigue resistance of loaded holes in sheet material is presented. The material is first dimpled centering about the region where the hole is to be made, thus introducing tensile plastic strain. The dimple is then flattened and the hole drilled so that the region around the hole is under residual compressive stress. Zero to tension fatigue tests indicate considerable improvement in the fatigue strength of loaded holes as a result of dimpling. A fatigue strength improvement factor of nearly three for 10**6 cycles to failure was obtained based on the median lives of nominally 0. 050-in. thick 2024-T3 aluminum alloy specimens.
引用
收藏
相关论文
共 50 条
  • [1] INCREASING FATIGUE-STRENGTH OF LOADED HOLES BY DIMPLING
    SHEWCHUK, J
    ROBERTS, FA
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1974, 96 (03): : 222 - 226
  • [2] THE EFFECT OF DIMPLING ON THE FATIGUE-STRENGTH OF LOADED HOLES IN A CORROSIVE ENVIRONMENT
    SHEWCHUK, J
    LOHSE, A
    EXPERIMENTAL MECHANICS, 1982, 22 (05) : N46 - N46
  • [3] EFFECT OF DIMPLING ON THE FATIGUE STRENGTH OF LOADED HOLES IN A CORROSIVE ENVIRONMENT.
    Shewchuk, J.
    Lohse, A.
    Experimental Techniques, 1985, 9 (09) : 33 - 36
  • [4] INCREASING FRETTING-FATIGUE STRENGTH OF DIMPLING
    SHEWCHUK, J
    LOHSE, A
    EXPERIMENTAL MECHANICS, 1979, 19 (05) : N39 - N39
  • [5] DECREASING FATIGUE-STRENGTH REDUCTION FACTOR BY DIMPLING
    SHEWCHUK, J
    JOURNAL OF TESTING AND EVALUATION, 1974, 2 (05) : 425 - 428
  • [6] Endoscopic ultrasonographic features of gastric aberrant pancreas without central dimpling.
    Shim, CS
    Bong, HK
    Lee, YH
    Cho, YD
    Kim, JO
    Cho, JY
    Kim, YS
    Lee, JS
    Lee, MS
    Hwang, SG
    GASTROINTESTINAL ENDOSCOPY, 1997, 45 (04) : 620 - 620
  • [7] EFFECT OF CLAMPING PRESSURE ON THE FATIGUE-STRENGTH OF DIMPLED AND UNDIMPLED LOADED HOLES
    LOHSE, AK
    SHEWCHUK, J
    JOURNAL OF TESTING AND EVALUATION, 1980, 8 (03) : 108 - 112
  • [8] STATIC AND FATIGUE STRENGTH OF COMPOSITE PLATES WITH HOLES
    Barski, Marek
    COMPOSITES THEORY AND PRACTICE, 2014, 14 (01): : 3 - 7
  • [9] INCREASING THE FATIGUE-STRENGTH OF DRILL PIPE
    BABASKIN, YZ
    KUTISHCHEV, SM
    KIRCHU, IF
    DUBENKO, LV
    ALIEV, GM
    TOKMAN, IG
    BARKAN, SE
    EGOROV, VA
    PCHELKIN, VN
    METALLURGIST, 1986, 30 (3-4) : 99 - 100
  • [10] The increase in fatigue strength in circular rods with oblique holes
    不详
    ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1932, 76 : 348 - 348
12345