Study on geometrical design of conical involute gear pair with nonintersecting-nonparallel-axes

被引：0

作者：

He, Jingliang ^{[1
]}

Wu, Xutang ^{[1
]}

机构：

[1] Sch. of Mech. Eng., Xi'an Jiaotong Univ., Xi'an 710049, China

来源：

Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2003年 / 37卷 / 05期

关键词：

Design; -; Drives; Geometry;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Based on the analysis of the spatial meshing relationship between conjugate gears and reference rack, a set of intact geometrical design methods for conical involute gear pair with nonintersecting-nonparallel-axes is presented. The derived formulae can be applied not only to all the possible independent layout forms of crossed-axes gear drive, but also to the case of parallel axes and intersecting axes. The design is composed of two methods - the sequential method and the reverse one. The former is a method to determine the mounting dimensions when the basic dimensions of a pair of gears are given first. The latter is a method to determine the basic dimensions of a pair of gears when the mounting dimensions are given first. The test gears are designed and made, and tooth bearing tests are performed. These practices show that this design method has applicability.

引用

页码：471 / 474

共 23 条

[1] CONICAL INVOLUTE GEAR - (DESIGN OF NONINTERSECTING-NONPARALLEL-AXIS CONICAL INVOLUTE GEAR)
MITOME, K
JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY, 1991, 34 (02): : 265 - 270
[2] Gearing principle and geometric design of conical involute gear pairs with crossed axes
He, J
Wu, X
Cui, Y
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2004, 218 (12) : 1517 - 1526
[3] Geometrical design of skew conical involute gear drives in approximate line contact
Wu, S. H.
Tsai, S. J.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2009, 223 (09) : 2201 - 2211
[4] TOOTH ACTION OF A PAIR OF GEARS .3. CONICAL INVOLUTE GEAR
MITOME, K
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (245): : 2757 - 2764
[5] CONICAL INVOLUTE GEAR (PART 3. TOOTH ACTION OF A PAIR OF GEARS).
Mitome, Ken-ichi
Bulletin of the JSME, 1985, 28 (245): : 2757 - 2764
[6] CONICAL INVOLUTE GEAR .1. DESIGN AND PRODUCTION SYSTEM
MITOME, K
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (212): : 299 - 305
[7] GEOMETRICAL DESIGN OF GEAR TRANSMISSIONS COMPRISING INVOLUTE BEVEL GEARS
GAVRILENKO, VA
BEZRUKOV, VI
RUSSIAN ENGINEERING JOURNAL, 1976, 56 (09): : 34 - 38
[8] The Parametric Design of the External Transmission of Involute Beveloid Gear with Parallel Axes
Shen, Shaohua
Shi, Xiangdong
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 1567 - 1570
[9] Contact stress analysis of concave conical involute gear pairs with non-parallel axes
Chen, Yi-Cheng
Liu, Chia-Chang
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2011, 47 (04) : 443 - 452
[10] CONICAL INVOLUTE GEAR .2. DESIGN AND PRODUCTION SYSTEM OF INVOLUTE PINION-TYPE CUTTER
MITOME, K
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (212): : 306 - 312

← 1 2 3 →