780-N/mm2 class high tensile strength steel plates with large-heat-lnput-weldability and low-weld-cracking-susceptibility for architectural construction

被引：0

|

作者：

Nagoya R and D Lab. ^{[1
]}

不详 ^{[2
]}

不详 ^{[3
]}

不详 ^{[4
]}

不详 ^{[5
]}

不详 ^{[6
]}

机构：

来源：

Nippon Steel Tech. Rep. | / 75卷 / 43-50期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

收藏

相关论文

共 11 条

[1] Development of TS780 N/mm2 Class Steel Plate with Low Reheat Cracking Susceptibility
Sato, Yuya
Takahashi, Toru
Ohmori, Akio
Yasuda, Koichi
Sato, Yuya; Takahashi, Toru; Ohmori, Akio; Yasuda, Koichi, 1600, Kawasaki Steel Corporation : 165 - 171
[2] INVESTIGATION ON LARGE HEAT INPUT WELDABILITY OF TENSILE-STRENGTH 50 KGF/MM2 GRADE STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURES
KOMATSUBARA, N
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S664 - S664
[3] DEVELOPMENT OF TENSILE STRENGTH 50 kgf/mm2 GRADE STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURES WITH HIGH TOUGHNESS IN LARGE HEAT INPUT WELDS (INVESTIGATION OF LARGE HEAT INPUT WELDABILITY OF STEEL PLATES WITH 50 kgf/mm2 GRADE FOR ARCTIC OFFSHORE STRUCTURES III).
Furusawa, Jun
Arimochi, Kazushige
Watanabe, Seiichi
Kurayasu, Hirofumi
Bessyo, Kiyoshi
Nakano, Naokazu
Suzuki, Shu-ichi
Transactions of the Iron and Steel Institute of Japan, 1986, 27 (01)
[4] STUDY FOR 100 KG/MM2 CLASS HIGH-TENSILE STRENGTH STEEL .2. DEVELOPMENT OF HEAVY GAUGE 100 KG/MM2 CLASS HIGH-TENSILE STRENGTH STEEL WITH HIGH TOUGHNESS AND WELDABILITY BY DIRECT QUENCH PROCESS
OKAMURA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S614 - S614
[5] INVESTIGATION ON LARGE HEAT INPUT WELDABILITY OF STEEL PLATES WITH 50 KGF/MM2 GRADE FOR ARCTIC OFFSHORE STRUCTURES .3. DEVELOPMENT OF TENSILE-STRENGTH 50 KGF/MM2 GRADE STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURES WITH HIGH TOUGHNESS IN LARGE HEAT INPUT WELDS
FURUSAWA, J
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1155 - 1155
[6] Development of controlled-rolled 70 kgf/mm2 and 80 kgf/mm2 class high tensile strength steel plates for welded structures
Amano, Keniti, 1600,
[7] IMPROVEMENT IN TOUGHNESS OF LARGE HEAT-INPUT WELD BOND OF 60 kg/mm2 GRADE HIGH TENSILE STRENGTH STEEL PLATES DUE TO BORON ADDITION AND LOW SILICON CONTENT.
Ohtani, Hiroo
Watanabe, Seiichi
Kawaguchi, Yoshiaki
Yamaguchi, Yoji
1978, 64 (14): : 2205 - 2214
[8] EFFECT OF CALCIUM TREATMENT ON STRESS RELIEF CRACKING IN 80kg/mm2 CLASS HIGH TENSILE STRENGTH STEEL.
Ono, Yasuhide
Okamura, Yoshihiro
Yano, Seinosuke
Fujii, Toshimitsu
Yamamoto, Koichi
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1981, 67 (10): : 1777 - 1786
[9] STUDY OF TOUGHNESS OF WELDED JOINT OF 80 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL FOR LOW-TEMPERATURE SERVICE .3. DEVELOPMENT OF HEAVY SECTION 80 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL WITH HIGH TOUGHNESS OF WELDED JOINT
CHIBA, H
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S611 - S611
[10] YP500 N/mm2 Class High Strength Steel Plates for Offshore Structures with Excellent CTOD Properties at Welded Joints
Yusuke, Terazawa
Toshitaka, Tanaka
Shinichi, Suzuki
JFE Technical Report, 2021, (26): : 143 - 149