CONDITIONS OF JOINT FORMATION IN DISSIMILAR METALS DURING COMBINED COLD ROLLING.

被引：4

作者：

Ershov, A.A. ^{[1
]}

Myl'nikov, A.S. ^{[1
]}

Sycheva, T.A. ^{[1
]}

机构：

[1] Ural Scientific-Research Inst of, Ferrous Metals, Sverdlovsk, USSR, Ural Scientific-Research Inst of Ferrous Metals, Sverdlovsk, USSR

来源：

Mechanics of Composite Materials | 1985年 / 21卷 / 01期

关键词：

JOINTS - ROLLING MILL PRACTICE - Cold Rolling;

D O I：

10.1007/BF00611813

中图分类号：

学科分类号：

摘要：

The method of joining dissimilar metals and alloys by combined cold rolling has been known for some time. Studies in this area are, however, rather limited and basically descriptive in nature with discussional representations and solutions of stated problems. A mathematical model of the cold-cladding process was developed as a result of the authors' investigations. The observable cohesive strength of the layers in multilayer materials is determined not only by the nature of these layers, but also depends on the actual contact area.

引用

页码：84 / 87

共 50 条

[1] Formation of the joint of dissimilar metals in the solid phase by the method of vacuum hot rolling
Borts, B. V.
MATERIALS SCIENCE, 2012, 47 (05) : 689 - 695
[2] Formation of the joint of dissimilar metals in the solid phase by the method of vacuum hot rolling
B. V. Borts
Materials Science, 2012, 47 : 689 - 695
[3] FORMATION OF SMUDGES AND IRON OXIDE FILM IN THE COURSE OF COLD ROLLING.
Komai, Masao
Fukuyama, Satoshi
Sato, Taizo
Iketaka, Satoshi
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1981, 67 (10): : 1763 - 1769
[4] EXPERIMENTAL DETERMINATION OF NORMAL PRESSURE AND FRICTION STRESS IN THE ROLLING GAP DURING COLD ROLLING.
Banerji, A.
Rice, W.B.
Annals of the CIRP, 1972, 21 (01): : 53 - 54
[5] DYNAMIC OPTIMIZATION OF AGC GAIN DURING ACCELERATION AND DECELERATION OF COLD STRIP ROLLING.
Asada, Yukio
Kitamura, Akira
Konishi, Masami
Morita, Tohru
Akedo, Hiroshi
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1981, 67 (15): : 2551 - 2557
[6] MODELING OF THE EFFECT OF TEMPERATURE ON THE YIELD POINT OF COPPER AND BRASS DURING COLD ROLLING.
Vasilev, Ya.D.
Shuvyakov, V.G.
Russian metallurgy. Metally, 1986, (04) : 65 - 70
[7] ROLL BITE CONDITIONS CONTROLLING FORMATION OF WEAR DEBRIS DURING COLD-ROLLING OF ALUMINUM
JANUSZKIEWICZ, KR
STRATFORD, G
WARD, T
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 45 (1-4) : 117 - 124
[8] TEXTURE FORMATION DURING COLD ROLLING OF ITTRIUM AND GADOLINIUM
ADAMESKU, RA
GELD, PV
CHUPRIKOV, GY
YUSHKOV, VI
FIZIKA METALLOV I METALLOVEDENIE, 1978, 46 (01): : 211 - 215
[9] FORMATION OF DEFORMATION TEXTURE IN SINGLE CRYSTALS OF THE ALLOY Fe-50% Ni DURING ROLLING.
Borodkina, M.M.
Belousova, N.S.
Physics of Metals and Metallography, 1974, 37 (05): : 170 - 175
[10] FORMATION OF THE GOSS ORIENTATION NEAR THE SURFACE OF 3 PCT SILICON STEEL DURING HOT ROLLING.
Shimizu, Y.
Ito, Y.
Iida, Y.
Metallurgical transactions. A, Physical metallurgy and materials science, 1986, 17 A (08): : 1323 - 1334

← 1 2 3 4 5 →