Characteristics of hot-pressed Al2O3 chopped fibre/partially-stabilized ZrO2 composites

被引：0
|
作者：
Chung-ju Natl Univ [1 ]
机构：
来源：
J Mater Sci Lett | / 19卷 / 1657-1659期
关键词：
Four point bending - Residual pores - Strain to failure - Thermal shock resistance - Thermal shock tests - Water quenching;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The mechanical properties of zirconia are degraded severely with increasing temperature because of reduced effectiveness of stress-induced transformation and softening of glassy grain boundary phases. In this study, an attempt was made to improve the high-temperature mechanical properties by the incorporation of alumina chopped fibres into a yttria-doped partially-stabilized zirconia.
引用
收藏
相关论文
共 50 条
  • [1] Characteristics of hot-pressed Al2O3 chopped fibre partially-stabilized ZrO2 composites
    Park, K
    Vasilos, T
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (19) : 1657 - 1659
  • [2] STRENGTH AND FRACTURE-TOUGHNESS OF ISOSTATICALLY HOT-PRESSED COMPOSITES OF AL2O3 AND Y2O3-PARTIALLY-STABILIZED ZRO2
    TSUKUMA, K
    UEDA, K
    SHIMADA, M
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1985, 68 (01) : C4 - C5
  • [3] Oxidation behavior and mechanical properties degradation of hot-pressed Al2O3/ZrB2/ZrO2 ceramic composites
    Li, Bin
    Deng, Jianxin
    Li, Yousheng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04): : 747 - 753
  • [4] SWELLING OF HOT-PRESSED AL2O3
    BENNISON, SJ
    HARMER, MP
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1985, 68 (11) : 591 - 597
  • [5] Mechanical properties of hot-pressed Al2O3/SiC composites
    Shi, X. L.
    Xu, F. M.
    Zhang, Z. J.
    Dong, Y. L.
    Tan, Y.
    Wang, L.
    Yang, J. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19): : 4646 - 4649
  • [6] Mechanical properties of hot-pressed ZrO2 reinforced with (W,Ti)C and Al2O3 additions
    Acchar, Wilson
    Fontes Silva, Yankel Bruno
    Cairo, Carlos Alberto
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (03): : 480 - 484
  • [7] PROCESSING-RELATED FRACTURE ORIGINS .1. OBSERVATIONS IN SINTERED AND ISOSTATICALLY HOT-PRESSED AL2O3/ZRO2 COMPOSITES
    LANGE, FF
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1983, 66 (06) : 396 - 398
  • [8] SI3N4-AL2O3-ZRO2 HOT-PRESSED COMPOSITES
    BELLOSI, A
    VINCENZINI, P
    BABINI, GN
    MATERIALS CHEMISTRY AND PHYSICS, 1987, 18 (03) : 205 - 229
  • [9] PARTIALLY-STABILIZED ZRO2 PARTICLE-MOSI2 MATRIX COMPOSITES
    PETROVIC, JJ
    HONNELL, RE
    JOURNAL OF MATERIALS SCIENCE, 1990, 25 (10) : 4453 - 4456
  • [10] STRENGTHENING OF HOT-PRESSED AL2O3 BY QUENCHING
    KIRCHNER, HP
    GRUVER, RM
    WALKER, RE
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1973, 56 (01) : 17 - 21
12345