MICROSTRUCTURES AND MECHANICAL PROPERTIES OF BETA TITANIUM ALLOYS.

被引：0
|
作者：
Nishikawa, Tomio [1 ]
Okada, Minoru [1 ]
Maeda, Takashi [1 ]
Toyama, Kazuo [1 ]
机构：
[1] Sumitomo Metal Industries Ltd, Jpn, Sumitomo Metal Industries Ltd, Jpn
来源：
Sumitomo Search | 1987年 / 35期
关键词：
AIRCRAFT MATERIALS - Light Metals - METALS TESTING - Fracture - TITANIUM METALLOGRAPHY - Microstructures - TITANIUM VANADIUM ALLOYS - Phase Diagrams;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Beta titanium alloys have been developed as candidates for new aerospace materials because of their good combination of high strength, high fracture toughness and their good workability. In this paper, the general features of beta titanium alloys are summarized and compared with conventional alpha or alpha-beta titanium alloys. The mechanical properties of Ti-10V-2Fe-3Al alloy and Ti-15V-3Al-3Sn-3Cr alloy, which are the most promising beta titanium alloys, are introduced in relation to their microstructural change after aging heat treatments. High tensile strengths about 140 kgf/mm**2 can be attained through the control of the morphology and the distribution of precipitated alpha particles by aging heat treatment in both of these alloys. Ti-10V-2Fe-3Al alloy after aging heat treatment shows 68 kgf/mm**2 in fatigue strength, and has a higher fracture toughness than Ti-6Al-4V alloy, which has the same levels of 0. 2% proof stresses.
引用
收藏
页码：21 / 28
相关论文
共 50 条
  • [1] EFFECTS OF OXYGEN AND HEAT TREATMENT ON THE MECHANICAL PROPERTIES OF ALPHA AND BETA TITANIUM ALLOYS.
    Liu, Z.
    Welsch, G.
    Metallurgical transactions. A, Physical metallurgy and materials science, 1988, 19 A (03): : 527 - 542
  • [2] EFFECT OF CARBON ON THE MECHANICAL PROPERTIES AND STRUCTURES OF TITANIUM ALLOYS.
    Solonina, O.P.
    Ulyakova, N.M.
    Metal Science and Heat Treatment, 1974, 16 (3-4): : 310 - 312
  • [3] Mechanical Properties of Zirconium, Titanium and Yttrium Hydride Alloys.
    Lanin, A.G.
    Zalivin, I.M.
    Turchin, V.N.
    Boiko, E.B.
    Problemy Prochnosti, 1984, (06):
  • [4] Mechanical properties of titanium alloys with lamellar microstructures and small beta-grain sizes
    Ivasishin, OM
    Lütjering, G
    JOURNAL OF ADVANCED MATERIALS, 2001, 33 (01): : 33 - 43
  • [5] TITANIUM-ALLOYS, MICROSTRUCTURES AND MECHANICAL-PROPERTIES
    KIMURA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (01): : 113 - 122
  • [6] Microtextural effects on mechanical properties of duplex microstructures in (α+β) titanium alloys
    Lindemann, J
    Wagner, L
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 263 (02): : 137 - 141
  • [7] The mechanical properties of magnesium alloys.
    Aitchison, L
    JOURNAL OF THE INSTITUTE OF METALS, 1923, 29 : 17 - 21
  • [8] Mechanical properties and microstructures of low cost β titanium alloys for healthcare applications
    Gunawarman, B
    Niinomi, M
    Akahori, T
    Souma, T
    Ikeda, M
    Toda, H
    MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2005, 25 (03): : 304 - 311
  • [9] Comparison of tensile properties for two beta-titanium orthodontic wire alloys.
    Guo, WH
    Iijima, M
    Brantley, WA
    Clark, WAT
    Wade, AB
    JOURNAL OF DENTAL RESEARCH, 2002, 81 : A173 - A173
  • [10] Microstructures and mechanical properties of mechanically alloyed Al-Al3Ti alloys.
    Cheng, YC
    Wang, SH
    Kao, PW
    Chang, CP
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 1891 - 1896
12345