Analysis of predicted and experimental data on the void fraction in subcooled boiling. Part II. Comparison of predicted and experimental data

被引：0
|
作者：
Plyutinskiy, V.I.
Pavlov, S.P.
Galasheva, T.V.
Khor'kov, S.N.
Gladysheva, N.N.
机构：
来源：
Heat transfer. Soviet research | 1988年 / 20卷 / 05期
关键词：
Mathematical Models;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Seven computational models are compared with experimental data on the void fraction in subcooled boiling, obtained in pipes and rod bundles. It is shown that in the case of lengthwise-constant heat fluxes under steady conditions, modles differing in terms of the magnitude of the condensatiion factor produce similar values of the void fraction. However, models with low values of the condensation factor are more accurate in the case of lengthwise - variable heat fluxes. The expression for slip is important in calculating the void fraction in rod bundles
引用
收藏
页码：614 / 621
相关论文
共 50 条
  • [1] Analysis of predicted and experimental data on the void fraction in subcooled boiling. Part I. Survey of mathematical models
    Plutinskiy, V.I.
    Pavlov, S.P.
    Galasheva, T.V.
    Khor'kov, S.N.
    Gladysheva, N.N.
    Heat transfer. Soviet research, 1988, 20 (05): : 607 - 613
  • [2] Subcooled flow film boiling across a horizontal cylinder. Part II. Comparison to experimental data
    Chou, X.S.
    Sankaran, S.
    Witte, L.C.
    Journal of Heat Transfer, 1995, 117 (01): : 175 - 184
  • [3] NUCLEATE BOILING OF HYDROGEN - COMPARISON BETWEEN EXPERIMENTAL AND PREDICTED DATA
    DRAYER, DE
    INDUSTRIAL & ENGINEERING CHEMISTRY FUNDAMENTALS, 1965, 4 (02): : 167 - &
  • [4] Influence of the composition of binary mixture on the heat transfer coefficient during pool boiling. Part II. Comparison of the calculation results with experimental data
    Krupiczka, R.
    Ziobrowski, Z.
    Inzynieria Chemiczna i Procesowa, 18 (01):
  • [5] Thermochemical stability: A comparison between experimental and predicted data
    Pasturenzi, C.
    Dellavedova, M.
    Gigante, L.
    Lunghi, A.
    Canavese, M.
    Cattaneo, C. Sala
    Copelli, S.
    JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 2014, 28 : 79 - 91
  • [6] Comparison of experimental and predicted data for conventional single screw extruders
    Samsonkova, P
    Vlcek, J
    ANTEC 2000: SOCIETY OF PLASTICS ENGINEERS TECHNICAL PAPERS, CONFERENCE PROCEEDINGS, VOLS I-III, 2000, : 106 - 110
  • [7] Analysis of predicted residual stress in a weld and comparison with experimental data using regression model
    Asadi M.
    Goldak J.A.
    Nielsen J.
    Zhou J.
    Tchernov S.
    Downey D.
    International Journal of Mechanics and Materials in Design, 2009, 5 (04) : 353 - 364
  • [8] Experimental investigation of void fraction variation in subcooled boiling flow under horizontal forced vibrations
    Chen, Shao-Wen
    Hibiki, Takashi
    Ishii, Mamoru
    Mori, Michitsugu
    Watanabe, Fumitoshi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 115 : 954 - 968
  • [9] CORRELATION OF EXPERIMENTAL-DATA ON HYDRAULIC RESISTANCE WITH SUBCOOLED BOILING
    BARTOLOMEI, GG
    KOVRIZHNYKH, VP
    THERMAL ENGINEERING, 1991, 38 (12) : 669 - 672
  • [10] Combustion synthesis of metal carbides: Part II. Numerical simulation and comparison with experimental data
    A. M. Locci
    A. Cincotti
    F. Delogu
    R. Orrù
    G. Cao
    Journal of Materials Research, 2005, 20 : 1269 - 1277
12345