EFFECTS OF COPPER ON THE MACHINABILITY OF COPPER SILUMIN.

被引：0
|
作者：
Muromachi, Shigeo
Takahashi, Tsuneo
Takatsuji, Yuzo
Tada, Shizuo
机构：
来源：
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals | 1973年 / 37卷 / 06期
关键词：
ALUMINUM METALLOGRAPHY - COPPER AND ALLOYS - Additives;
D O I：
10.2320/jinstmet1952.37.6_639
中图分类号：
学科分类号：
摘要：
In this report the tests of the specimens with minimum amounts of impurities are performed from the viewpoints of cutting resistance, tool wear, roughness of finished surface, etc. As a result, it is evident that the addition of Si and Cu decreases the cutting resistance, and if the tool life is considered it will be better to decrease the Cu content in the specimens with a relatively large amount of Si. On the contrary, in the case of a small content of Si it will be better to increase the Cu content.
引用
收藏
页码：639 / 644
相关论文
共 50 条
  • [1] Silumin. An improvement of its dynamic elastic qualities and endurance limit by the addition of copper.
    Welter, G
    JOURNAL OF THE INSTITUTE OF METALS, 1926, 36 : 325 - 358
  • [2] PECULIARITIES OF THE CRYSTALLIZATION OF EUTECTIC PHASES IN SILUMIN.
    Mazur, V.I.
    Physics of Metals and Metallography, 1979, 48 (05): : 73 - 77
  • [3] Machinability of lead free copper alloys
    Faculty of Mechanical Engineering, CTU in Prague, Technicka 4, Praha 6
    166 07, Czech Republic
    Manuf. Technol., 5 (870-875):
  • [4] Effects of copper content on the machinability and corrosion resistance of martensitic stainless steel
    Geng, Hongming
    Wu, Xiaochun
    Wang, Hongbin
    Min, Yongan
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (01) : 83 - 87
  • [5] Effects of copper content on the machinability and corrosion resistance of martensitic stainless steel
    Hongming Geng
    Xiaochun Wu
    Hongbin Wang
    Yongan Min
    Journal of Materials Science, 2008, 43 : 83 - 87
  • [6] Machinability of aluminium cast alloys especially of silumin
    不详
    ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1924, 68 : 11 - 11
  • [7] The decisive impact of microstructure on the machinability of pure copper
    Sun, Xiaoxiang
    Ebrahimi, Mahmoud
    Attarilar, Shokouh
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2021, 21 (03)
  • [8] Machinability and microtopography of OFHC copper and electroless nickel
    Brinksmeier, E
    Riemer, O
    PRECISION ENGINEERING, NANOTECHNOLOGY, VOL 1, PROCEEDINGS, 1999, : 450 - 453
  • [9] Analysis of the Machinability of Copper Alloy Ampcoloy by WEDM
    Mouralova, Katerina
    Benes, Libor
    Prokes, Tomas
    Bednar, Josef
    Zahradnicek, Radim
    Jankovych, Robert
    Fries, Jiri
    Vontor, Jakub
    MATERIALS, 2020, 13 (04)
  • [10] Review of the machinability of copper-base alloys
    CANMET, Ottawa, Canada
    Can Metall Q, 1 (1-15):
12345