Parametric analysis and optimization design of high specific speed centrifugal impeller

被引：0
|
作者：
Zhao J. [1 ]
Wang W. [1 ]
Pei J. [1 ]
Yuan J. [1 ]
You B. [2 ]
机构：
[1] National Research Center of Pumps, Jiangsu University, Zhenjiang
[2] Shanghai Kaiquan Pump(Group)CO., Ltd., Shanghai
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2022年 / 54卷 / 07期
关键词：
Artificial neural network; Centrifugal pump; Correlation analysis; Genetic algorithm; Optimal design;
D O I：
10.11918/202112121
中图分类号：
学科分类号：
摘要：
To improve the performance of high specific speed centrifugal pumps and to solve the problem of multi-parameter optimization, an optimal design method based on variable dimensionality reduction and intelligent algorithms was proposed in this paper. The variable dimensionality reduction process was based on the Pearson correlation analysis method, which investigated the influence of eighteen design variables of the impeller on the pump hydraulic performance, and selected eight of them with high influence factors as the final optimization variables. The optimization process was based on the Latin Hypercube Sampling method to generate 160 sets of design samples, and the optimization problem was solved by using artificial neural network and genetic algorithm with maximizing the design working efficiency as the objective. The optimization results are verified by CFD, and the efficiency of the model pump is improved by 3.02% at the design operating point, and the efficient operation zone is broadened; compared with the original impeller, the turbulent kinetic energy distribution in the optimized impeller is improved and the unstable flow structure is reduced. Copyright ©2022 Journal of Harbin Institute of Technology.All rights reserved.
引用
收藏
页码：45 / 52
页数：7
相关论文
共 19 条
  • [1] SHANKAR V K A, UMASHANKAR S, PARAMASIVAM S, Et al., A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping system, Applied Energy, 181, (2016)
  • [2] BERTOLDI P, FALKNER H, REEVES D., European commission-europump guidance on efficiencies for pumps, Energy Efficiency in Motor Driven Systems, (2003)
  • [3] WU Peng, LAI Zhounian, WU Dazhuan, Et al., Optimization research of parallel pump system for improving energy efficiency, Journal of Water Resources Planning and Management, 141, 8, (2015)
  • [4] SI Qiaorui, LIN Gang, YUAN Shouqi, Et al., Multi-objective optimization on hydraulic design of non-overload centrifugal pumps with high efficiency and low noise, Transactions of the Chinese Society of Agricultural Engineering, 32, 4, (2016)
  • [5] DAI Cui, KONG Fanyu, DONG Liang, Et al., Hydraulic and acoustic property optimization for centrifugal pump as turbine based on response surface method, Transactions of the Chinese Society of Agricultural Engineering, 31, 15, (2015)
  • [6] XU Jianzhong, WU Yulin, ZHANG Yangjun, Et al., Fluid machinery and fluid mechanics, (2010)
  • [7] CHEN Jianhua, ZHOU Chenjia, WANG Xue, Et al., Optimization design of high-speed well pump based on orthogonal test, Journal of Drainage and Irrigation Mechanical Engineering, 39, 5, (2021)
  • [8] WANG Yanfeng, ZHANG Lianjun, DUAN Haipeng, Et al., Hydraulic performance optimization of radial diffuser multistage pump based on genetic algorithm-back propagation neural network, Science Technology and Engineering, 21, 4, (2021)
  • [9] TONG Zheming, CHEN Yao, TONG Shuiguang, Et al., Multi-objective parameters optimization of low specific speed centrifugal pump based on NSGA-Ⅲ genetic algorithm, China Mechanical Engineering, 31, 18, (2020)
  • [10] YUAN Shouqi, WANG Wenjie, PEI Ji, Et al., Multi-objective optimization of low-specific-speed centrifugal pump, Transactions of the Chinese Society of Agricultural Engineering, 31, 5, (2015)
12