Microstructural evolution and anisotropic shrinkage in constrained sintering and sinter forging

被引：0
|
作者：
机构：
[1] Wakai, Fumihiro
[2] Bordia, Rajendra K.
来源：
Wakai, F. (wakai.f.aa@m.titech.ac.jp) | 1600年 / Blackwell Publishing Inc.卷 / 95期
关键词：
The microstructures of sintering bodies become anisotropic in constrained sintering of a thin film on rigid substrate; as well as in stress-assisted densifications such as sinter forging and hot pressing. The deformation and the stress states in the body have been described by general constitutive equations using sintering stress tensor and viscosity tensor. These macroscopic quantities were determined from local microstructure and microscopic kinetics for the special case of face-centered tetragonal structure. The simulation results were applied to the cases of sinter forging and constrained sintering and qualitatively compared to the experimental results available in the literature. This model is able to predict both the evolution of the anisotropic microstructure during sintering; and also the effect of the local micro-structure on anisotropic shrinkage. © 2012 The American Ceramic Society;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Conference article (CA)
引用
收藏
相关论文
共 50 条
  • [1] Microstructural Evolution and Anisotropic Shrinkage in Constrained Sintering and Sinter Forging
    Wakai, Fumihiro
    Bordia, Rajendra K.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (08) : 2389 - 2397
  • [2] Modeling the Microstructural Evolution During Constrained Sintering
    Bjork, Rasmus
    Frandsen, Hendrik Lund
    Pryds, Nini
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2015, 98 (11) : 3490 - 3495
  • [3] Anisotropic microstructural evolution and coarsening in free sintering and constrained sintering of metal film by using FIB-SEM tomography
    Okuma, Gaku
    Miyaki, Ryo
    Shinobe, Kan
    Sciazko, Anna
    Shimura, Takaaki
    Yan, Zilin
    Hara, Shotaro
    Ogashiwa, Toshinori
    Shikazono, Naoki
    Wakai, Fumihiro
    ACTA MATERIALIA, 2021, 215
  • [4] Sintering and densification; New techniques: Sinter forging
    Winnubst, A.J.A.
    Boutz, M.M.R.
    Key Engineering Materials, 1998, 153 (154/-): : 301 - 323
  • [5] Anisotropic sintering shrinkage and microstructural evolution of c-axis-oriented Si3N4 ceramics
    Takahashi, Takuma
    Tatami, Junichi
    Nakano, Hiromi
    Tanaka, Satoshi
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2019, 127 (06) : 435 - 442
  • [6] Evaluation of thermal anisotropic evolution in the sinter structure of direct sinter joining to silicon via coupled microstructural characterizations
    Matsuda, Tomoki
    Seo, Ryotaro
    Takeuchi, Akihisa
    Uesugi, Kentaro
    Yasutake, Masahiro
    Kambara, Makoto
    Hirose, Akio
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 923
  • [7] Effect of the Sintering Temperature and Atmosphere on the Microstructural Evolution and Shrinkage Behavior of CuO Ceramics
    Song, Ju-Hyun
    Lee, Jung-A
    Lee, Joon-Hyung
    Heo, Young-Woo
    Kim, Jeong-Joo
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2012, 49 (06) : 528 - 534
  • [8] Modelling microstructural evolution of porous polycrystalline materials and a numerical study of anisotropic sintering
    Ch'ng, HN
    Pan, J
    JOURNAL OF COMPUTATIONAL PHYSICS, 2005, 204 (02) : 430 - 461
  • [9] Anisotropic shrinkage induced by particle rearrangement in sintering
    Wakai, Fumihiro
    Chihara, Kentarou
    Yoshida, Michiyuki
    ACTA MATERIALIA, 2007, 55 (13) : 4553 - 4566
  • [10] Anisotropic microstructural development during the constrained sintering of dip-coated alumina thin films
    Guillon, Olivier
    Weiler, Ludwig
    Roedel, Juergen
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (05) : 1394 - 1400
12345