Joining similar and dissimilar materials with GFRP

被引：0
|
作者：
Kumar, Prashant [1 ]
Singh, Ritesh Kumar [1 ]
Kumar, Rajeev [1 ]
机构：
[1] Department of Mechanical Engineering, IIT Kanpur, India
来源：
International Journal of Adhesion and Adhesives | 2007年 / 27卷 / 01期
关键词：
FRP-joints were made between two components by winding a tow made of strong and stiff glass fibers. The tow was wetted with a suitable resin before it was wound. In a few hours the winding cures to give a strong and stiff joint. A T-joint between two pipes was selected as a specimen. Three kinds of appropriate windings; diagonal; straight and circular were used. The strength of the T-joint was determined under four loading conditions: (i) tensile; (ii) in-plane bending; (iii) bending under a transverse load; and (iv) torsion-cum-bending. The strength of FRP-joint between mild steel pipes was found to be comparable to the strength of a welded joint. Also the strength of a joint between pipes of dissimilar materials; mild steel and aluminum; was found to be marginally higher than the strength of the FRP-joint between mild steel pipes. © 2006 Elsevier Ltd. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：68 / 76
相关论文
共 50 条
  • [1] Joining similar and dissimilar materials with GFRP
    Kumar, Prashant
    Singh, Ritesh Kumar
    Kumar, Rajeev
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2007, 27 (01) : 68 - 76
  • [2] Joining of similar and dissimilar materials
    De Zanet, Alessandro
    AMERICAN CERAMIC SOCIETY BULLETIN, 2021, 100 (04): : 48 - 48
  • [3] JOINING SIMILAR AND DISSIMILAR ADVANCED ENGINEERED MATERIALS
    BAESLACK, WA
    FROES, FH
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1995, 47 (03): : 13 - 15
  • [4] Influence of process parameters on microwave joining of the similar/dissimilar materials: A review
    Thakur, Ankush
    Bedi, Raman
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 3139 - 3147
  • [5] Joining of dissimilar materials
    Martinsen, K.
    Hu, S. J.
    Carlson, B. E.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (02) : 679 - 699
  • [6] Joining of dissimilar materials
    Sepold, G
    Kreimeyer, M
    FIRST INTERNATIONAL SYMPOSIUM ON HIGH-POWER LASER MACROPROCESSING, 2003, 4831 : 526 - 533
  • [7] Experimental investigation on friction drill joining of difficult-to-machine materials: a new methodology for joining of similar and dissimilar materials
    Abbasi R.
    Dehghan S.
    Loh-Mousavi M.
    Welding International, 2021, 35 (7-9) : 281 - 294
  • [8] Butt joining of similar & dissimilar pipe material by cold joining process
    Ramkumar, J.
    Singhal, A. K.
    Singh, Ritesh Kumar
    kumar, Prashant
    ADVANCED COMPOSITES LETTERS, 2007, 16 (05) : 173 - 179
  • [9] JOINING DISSIMILAR METALS WITH TRANSITION MATERIALS
    不详
    AUTOMOTIVE ENGINEERING, 1976, 84 (12): : 32 - &
  • [10] Spot joining of aluminum and dissimilar materials
    Sugimoto Y.
    Tanaka K.
    Nishiguchi K.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2019, 69 (02): : 74 - 80
12345