Growth stress in tungsten carbide-diamond-like carbon coatings

被引：0

作者：

Pujada, B.R. ^{[1
,2
,5
]}

Tichelaar, F.D. ^{[3
]}

Arnoldbik, W.M. ^{[4
]}

Sloof, W.G. ^{[2
]}

Janssen, G.C.A.M. ^{[2
]}

机构：

[1] Materials Innovation Institute M2i, Mekelweg 2, 2600 GA Delft, Netherlands

[2] Department of Materials Science and Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, Netherlands

[3] Kavli Institute of Nanoscience, National Centre for HTEM, Delft University of Technology, Lorentzweg 1, 2628 CJ Delft, Netherlands

[4] Department of Physics and Astronomy, Surfaces and Interfaces Devices, Faculty of Science, Utrecht University, P.O. Box 80.000, 3508 TA Utrecht, Netherlands

[5] Brazilian Center for Physics Research (CBPF), Rio de Janeiro, Brazil

来源：

Journal of Applied Physics | 2009年 / 105卷 / 03期

关键词：

Growth stress in tungsten carbide-diamond-like carbon coatings; sputter deposited in a reactive argon/acetylene plasma; has been studied as a function of the acetylene partial pressure. Stress and microstructure have been investigated by wafer curvature and transmission electron microscopy (TEM) whereas composition and energy distribution functions of positive ions were obtained by electron probe microanalyzer; elastic recoil detection analysis; and mass-energy analyzer (MEA). It has been observed that the compressive stress decreases with increasing acetylene partial pressure; showing an abrupt change from -5.0 to -1.6 GPa at an acetylene partial pressure of 0.012 Pa. TEM micrographs show that by increasing the acetylene partial pressure in the plasma from 0 to 0.012 Pa; the microstructure of the coating changes from polycrystalline to amorphous. MEA results show that the most probable energy of positive ions bombarding the substrate during deposition in pure argon and argon/acetylene atmosphere is the same. Based on the results; it is concluded that the huge variation in the compressive stress at low acetylene partial pressures is due to a change in the microstructure of the coating from polycrystalline to amorphous and not to the energy of positive ions bombarding the film. © 2009 American Institute of Physics;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

共 50 条

[1] Growth stress in tungsten carbide-diamond-like carbon coatings
Pujada, B. R.
Tichelaar, F. D.
Arnoldbik, W. M.
Sloof, W. G.
Janssen, G. C. A. M.
JOURNAL OF APPLIED PHYSICS, 2009, 105 (03)
[2] Stress in tungsten carbide-diamond like carbon multilayer coatings
Pujada, B. R.
Tichelaar, F. D.
Janssen, G. C. A. M.
APPLIED PHYSICS LETTERS, 2007, 90 (02)
[3] Hardness of and stress in tungsten carbide-diamond like carbon multilayer coatings
Pujada, B. R.
Tichelaar, F. D.
Janssen, G. C. A. M.
SURFACE & COATINGS TECHNOLOGY, 2008, 203 (5-7): : 562 - 565
[4] Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings
Strondl, C
Carvalho, NM
De Hosson, JTM
van der Kolk, GJ
SURFACE & COATINGS TECHNOLOGY, 2003, 162 (2-3): : 288 - 293
[5] Tungsten carbide/diamond-like carbon multilayer coatings on steel for tribological applications
Rincón, C
Zambrano, G
Carvajal, A
Prieto, P
Galindo, H
Martínez, E
Lousa, A
Esteve, J
SURFACE & COATINGS TECHNOLOGY, 2001, 148 (2-3): : 277 - 283
[6] Effects of Diamond-like Carbon and Tungsten-Carbide Carbon Coatings on Tribological Performance of Cam-Tappet Conjunction
Andreou, Panagiotis
Soleimanian, Parivash
Mohammadpour, Mahdi
Bewsher, Stephen R. R.
Offner, Gunter
APPLIED SCIENCES-BASEL, 2023, 13 (13):
[7] Synthesis of diamond coatings on tungsten carbide with photon plasmatron
Schwarz, J
Meteva, K
Grigat, A
Schubnov, A
Metev, S
Vollertsen, F
DIAMOND AND RELATED MATERIALS, 2005, 14 (3-7) : 302 - 307
[8] Diamond coatings on tungsten carbide and their erosive wear properties
Amirhaghi, S
Reehal, HS
Wood, RJK
Wheeler, DW
SURFACE & COATINGS TECHNOLOGY, 2001, 135 (2-3): : 126 - 138
[9] A new design of tungsten carbide tools with diamond coatings
Weihnacht, V
Fan, WD
Jagannadham, K
Narayan, J
Liu, CT
JOURNAL OF MATERIALS RESEARCH, 1996, 11 (09) : 2220 - 2230
[10] Diamond coatings on tungsten carbide and their erosive wear properties
Amirhaghi, S., 2001, Elsevier Sequoia SA, Lausanne, Switzerland (135) : 2 - 3

← 1 2 3 4 5 →