Experimental Analysis on Friction Noise of Disc Brake

被引：0
|
作者：
Dong H. [1 ]
Bao J. [1 ,2 ]
Yin Y. [1 ]
Guo C. [1 ]
Huang S. [1 ]
Zhao S. [1 ]
机构：
[1] China University of Mining and Technology, School of Mechanical and Electrical Engineering, Xuzhou, 221116, Jiangsu
[2] China University of Mining and Technology, Jiangsu Collaborative Innovation Center of Intelligent Mining Equipment, Xuzhou, 221008, Jiangsu
来源：
Mocaxue Xuebao/Tribology | 2020年 / 40卷 / 02期
关键词：
Brake friction noise; Disk brake; Equivalent A sound level; Friction coefficient; Friction fluctuation coefficient;
D O I：
10.16078/j.tribology.2019108
中图分类号：
学科分类号：
摘要：
The friction noise during braking of disc brake not only affects ride comfort, but also brings serious noise pollution. Friction noise features instantaneity and uncertainty, and so far there is no unified conclusion on the mechanism of brake friction noise. Based on the acoustic vibration test bench of disc brake, the law of variation of friction coefficient, friction fluctuation coefficient and equivalent A sound level under different braking pressures and at initial braking speeds were researched in this paper. Combined with the experimental analysis of micro-characteristics of friction disc, the occurrence law and mechanism of friction noise of disc brake were revealed from the tribological perspective. The results of the tests showed that the friction noise decreased with the increase of the initial braking speed, and declined after a period of rising when the braking pressure grew. The brake friction noise resulted from instability of the friction system with the friction pair having gullies and adhesion on surface which both had a positive correlation with the pressure and frequency of noise. The research results were of great theoretical significance and practical value for explaining the mechanism of friction noise of brakes and curbing the noise pollution of brakes. © 2020, Science Press. All right reserved.
引用
收藏
页码：175 / 184
页数：9
相关论文
共 19 条
  • [1] Li J., Mo J., Wang D., Et al., Effect of braking force on the characteristics of brake squeal and wear, Lubrication Engineering, 42, 3, pp. 49-53, (2017)
  • [2] Wang W., Li J., Liu G., Et al., Optimal suppression simulation on automotive disc brake noise, Computer Simulation, 36, 1, pp. 171-175, (2019)
  • [3] Chen G., Investigation into friction-induced noise under metal reciprocating sliding conditions, (2002)
  • [4] Wang D., Mo J., Zhang Q., Et al., Effect of filling material into grooves on the interfacial friction-induced vibration and noise, Tribology, 37, 5, pp. 647-655, (2017)
  • [5] Wang A., Mo J., Gai X., Et al., The influence of surface roughness on friction-induced squeal, Tribology, 34, 4, pp. 400-407, (2014)
  • [6] Mo J., Wang D., Li J., Et al., Effect of friction heat on interfacial wear and brake system stability, Shanghai Jiaotong University(Science), 52, 5, pp. 624-630, (2018)
  • [7] Gai X., Mo J., Liu M., Et al., Suppressing friction-induced squeal noise at interface by surface texturing, China Surface Engineering, 28, 3, pp. 102-107, (2015)
  • [8] Zhang L., Zhang X., Meng D., Experimental study on transient characteristics and key factors of vehicle brake groan, Journal of Mechanical Engineering, 54, 24, pp. 118-128, (2018)
  • [9] Zhang F., Guan D., A study on the damping method to suppress the disc brake squeal, Chinese Journal of Automotive Engineering, 25, 3, pp. 264-268, (2003)
  • [10] Jiusheng B., Lijian L., Yan Y., Et al., Frictional properties and mechanisms of an organic-metal brake pair braking repeatedly in magnetic field, Tribology Transactions, 61, 1, pp. 1-11, (2018)
12