Multiple elastic-plastic impacts between free-free beam and simply supported beam

被引：0
|
作者：
Liu Z. [1 ]
Yin X. [1 ]
机构：
[1] Department of Mechanics and Engineering Science, Nanjing University of Science and Technology
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2010年 / 46卷 / 10期
关键词：
Beam; Elastoplasticity; Energy dissipation; Multiple-impact; Transient analysis;
D O I：
10.3901/JME.2010.10.047
中图分类号：
学科分类号：
摘要：
A multiple contact impact separation (MCIS) method which combines the local elastic-plastic contact model with the finite difference method is proposed for the research of beam - beam multiple elastic-plastic impact problem. The uniaxial compression elastic-plastic contact deformation model is applied in the multiple elastic-plastic loading and unloading process, and finite difference method is adopted to solve dynamic equations, so as to completely simulate each elastic-plastic impact in the whole orthogonal impact process between a free beam and a simply supported beam. Through comparison to the ideal rigid plastic model and the three-dimensional finite element method (FEM), it is shown that the calculation result of MCIS method is reliable and its calculation efficiency is high. It is found that the multiple elastic-plastic impact phenomenon between the beams is caused by the response of impact deformation, and it is the result of intercoupling of local contact deformation and global structure deformation, which has an obvious characteristic of divided region of impacts. Comparing to the first impact, the impact force, impact impulse and impact energy loss of subsequent impacts are significant. Hence, sufficient attention should be paid to the phenomenon of multiple elastic-plastic impacts of flexible structure.
引用
收藏
页码：47 / 53
页数：6
相关论文
共 12 条
  • [1] Sills S., Overney R.M., Gotsmann B., Et al., Strain shielding and confined plasticity in thin polymer films: Impacts on thermomechanical data storage, Tribology Letters, 19, 1, pp. 9-15, (2005)
  • [2] Fahrenthold E.P., Hernandez R.J., Simulation of orbital debris impact on the space shuttle wing leading edge, International Journal of Impact Engineering, 33, 1-12, pp. 231-243, (2006)
  • [3] Sun S., Yang J., Li S., Et al., Plastic dynamic response of turbo-blade rotating in high speed under impact by flying object, Chinese Journal of Mechanical Engineering, 35, 1, pp. 99-102, (1999)
  • [4] Knudsen J., Massih A.R., Vibro-impact dynamics of a periodically forced beam, ASME Journal of Pressure Vessel Technology, 122, 2, pp. 210-221, (2000)
  • [5] Stoianovici D., Hurmuzlu Y., A critical study of the applicability of rigid-body collision theory, Journal of Applied Mechanics, 63, pp. 307-316, (1996)
  • [6] Reid S.R., Yu T.X., Yang J.L., An elastic-plastic hardening-softening cantilever beam subjected to a force pulse at its tip: A model for pipe whip, Proceeding of Royal Society of London A, 454, pp. 997-1029, (1998)
  • [7] Yu J., Huang R., Numerical simulation and a simplified model for the early-stage response of a mild steel beam under impact loading, Chinese Journal of Theoretical and Applied Mechanics, 29, 4, pp. 464-469, (1997)
  • [8] Pashah S., Massenzio M., Jacquelin E., Prediction of structural response for low velocity impact, International Journal of Impact Engineering, 35, 2, pp. 119-132, (2008)
  • [9] Ruan H.H., Yu T.X., Local deformation models in analyzing beam-on-beam collisions, International Journal of Mechanical Sciences, 45, 3, pp. 397-423, (2003)
  • [10] Ruan H.H., Yu T.X., Experimental study of collision between a free-free beam and a simply supported beam, International Journal of Impact Engineering, 32, pp. 416-443, (2005)
12