Investigations of elastic modulus and hardness of air plasma sprayed thermal barrier coatings by nanoindentation method

被引：0
|
作者：
Mao, Wei-Guo [1 ]
Chen, Qiang [1 ]
Zhang, Bin [1 ]
Wan, Jie [1 ]
机构：
[1] Key Laboratory of Low Dimensional Materials and Application Technology (Ministry of Education), Faculty of Materials, Optoelectronics and Physics, Xiangtan University, Xiangtan 411105, Hunan, China
来源：
Cailiao Gongcheng/Journal of Materials Engineering | 2011年 / 10期
关键词：
Sprayed coatings - Elastic moduli - Thermal barrier coatings - Thermal cycling - Plasma spraying - Nanoindentation - Weibull distribution - Plasma jets;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The parabolic evolutions of elastic modulus and hardness of air plasma sprayed thermal barrier coatings under thermal cycles were studied by nanoindentation method. The experimental data were analyzed by Weibull statistical method to minimize the measurement scatter. The results indicated that elastic modulus and hardness in the interface region of the coating display anisotropic distribution. They increase with thermal cycling and then gradually keep a constant after some thermal cycles. The values of elastic modulus and hardness in the cross-sectional coating are larger than that in the coating surface region. The reason was discussed with the aid of the scanning electronic microscope observations.
引用
收藏
页码：66 / 71
相关论文
共 50 条
  • [1] ANALYTICAL AND EXPERIMENTAL STUDY OF PHASE EFFECTS ON THE ELASTIC MODULUS OF AIR PLASMA SPRAYED ALUMINA COATINGS USING NANOINDENTATION
    Liu, Ranran
    Guo, S. M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2010, VOL 5, PTS A AND B, 2012, : 1465 - 1473
  • [2] Elastic modulus of plasma sprayed NiCr coatings
    School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China
    不详
    Hua Dong Li Gong Da Xue/J East China Univ Sci Technol, 2007, 2 (276-280):
  • [3] Thermal shock resistance of air plasma sprayed thermal barrier coatings
    Fleck, N. A.
    Cocks, A. C. F.
    Lampenscherf, S.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (11) : 2687 - 2694
  • [4] Effect of porous microstructure on the elastic modulus of plasma-sprayed thermal barrier coatings: Experiment and numerical analysis
    Ma, Kang
    Zhu, Jianguo
    Xie, Huimin
    Wang, Huaixi
    SURFACE & COATINGS TECHNOLOGY, 2013, 235 : 589 - 595
  • [5] Hardness and Young's modulus distributions in atmospheric plasma sprayed WC-Co coatings using nanoindentation
    Rayon, E.
    Bonache, V.
    Salvador, M. D.
    Roa, J. J.
    Sanchez, E.
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (17-18): : 4192 - 4197
  • [6] Air plasma sprayed thermal barrier coatings on titanium alloy substrates
    Zhou, Hong
    Li, Fei
    Wang, Bo He Jun
    Sun, Bao-De
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (16-17): : 7360 - 7367
  • [7] Effect of residual stresses on air plasma sprayed thermal barrier coatings
    Khan, AN
    Lu, J
    Liao, H
    SURFACE & COATINGS TECHNOLOGY, 2003, 168 (2-3): : 291 - 299
  • [8] OPTIMIZING OF THE REFLECTIVITY OF AIR PLASMA SPRAYED CERAMIC THERMAL BARRIER COATINGS
    Stuke, A.
    Carius, R.
    Marques, J-L
    Mauer, G.
    Schulte, M.
    Sebold, D.
    Vassen, R.
    Stoever, D.
    ADVANCED CERAMIC COATINGS AND INTERFACES II, 2008, 28 (03): : 99 - 113
  • [9] Thermal cyclic behavior of air plasma sprayed thermal barrier coatings sprayed on stainless steel substrates
    Khan, A. Nusair
    Lu, J.
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (08): : 4653 - 4658
  • [10] THERMAL SHOCK BEHAVIOR OF AIR PLASMA SPRAYED CoNiCrAlY/YSZ THERMAL BARRIER COATINGS
    Liu, Zi Wei
    Wu, Wei
    Hua, Jia Jie
    Lin, Chu Cheng
    Zheng, Xue Bin
    Zeng, Yi
    SURFACE REVIEW AND LETTERS, 2014, 21 (05)
12345