Calculation Method for the Inductance of the Ship Deperming Coils Considering the Hull Eddy Current Effect

被引：0
|
作者：
Zhou G. [1 ]
Tang L. [1 ]
Sun Z. [1 ]
Wu K. [1 ]
Li Z. [1 ]
机构：
[1] School of Electrical and Information Engineering, Naval University of Engineering, Hubei, Wuhan
来源：
Binggong Xuebao/Acta Armamentarii | 2022年 / 43卷 / 11期
关键词：
deperming coils; eddy current; inductance calculation; ship; skin effect;
D O I：
10.12382/bgxb.2021.0596
中图分类号：
学科分类号：
摘要：
Deperming power systems are designed based on the inductance of the ship deperming coils. In view of the complex ship structure and the significant demagnetization effect of the hull eddy current, an approach for calculating the inductance based harmonic magnetic analysis is presented. A 3-D harmonic magnetic analysis is conducted to extract the real and imaginary parts of the coil terminal voltages and currents, based on which the coil inductances can be determined according to the impedance phasor expression. The influence of the skin effect of the shell eddy current on the calculation is emphatically analyzed and the shell mesh further optimized. The inductance of the deperming coils on the actual scale aircraft carrier are calculated, and its influencing factors discussed. The analytic calculation model of the air-core coil inductance and the physical scale model of the aircraft carrier deperming coil inductance are designed, and the scaled model inductance is measured. The results show that the relative error of the air-core coil inductance calculation is merely 1. 8%, and the maximum relative errors of the self-inductance and mutual inductance calculations of the scaled-down model are 7. 1% and 17. 2%, respectively. This convincingly validates the effectiveness of the proposed method and provides a reference for the design of power source for ship deperming. © 2022 China Ordnance Society. All rights reserved.
引用
收藏
页码：2866 / 2874
页数：8
相关论文
共 20 条
  • [1] ZHOU G H, XIAO C H, LIU D M, Et al., Remanent magnetic field modeling of naval vessels based on integral method and Tikhonov regularization method, Acta Armamentarii, 33, 4, pp. 459-464, (2012)
  • [2] LIU D M., Theory and method of ship demagnetization, (2011)
  • [3] WANG H Z., A novel degaussing expert system and its application in automatic degaussing station, pp. 1-100, (2009)
  • [4] XU J., Analysis and ameliorating design of damage of degaussing equipment of some marine, Ship Electronic Engineering, 35, 9, pp. 131-133, (2015)
  • [5] XU J., Analysis and modified design of peak voltage in power supply for ship爷 s degaussing equipment, Marine Electric & Electronic Engineering, 36, 5, pp. 16-19, (2016)
  • [6] HU W S., Medium-sized vessel section degaussing system design and application analysis, Mine Warfare & Ship Self-Defence, 18, 4, pp. 57-59, (2010)
  • [7] LI Y S, YUAN Y, GENG P, Et al., Design of synchronization and real time in ships distributed degaussing system, Marine Electric & Electronic Engineering, 34, 12, pp. 5-8, (2014)
  • [8] SONG B B, CUI S M, LI Y, Et al., A fast general method to calculate mutual inductance for EV dynamic wireless charging system, IEEE Transcations on Power Electronics, 36, 3, (2021)
  • [9] EBADI F, MARDANEH M, RAHIDEH A., Inductance analytical calculations of brushless surface-mounted permanent-magnet machines based on energy method, COMPEL-The International Journal of Computation and Mathematics in Electrical and Electronic Engineering, 38, 2, pp. 536-556, (2019)
  • [10] HAO S P, LI B M., Calculation inductance of toroidal inductor wound by rectangular cross-sectional wire, IEEE Transcations on Plasma Science, 49, 9, pp. 2910-2915, (2021)
12