Setting the martensite content and surface roughness in the turning process

被引：0

作者：

Denkena B. ^{[1
]}

Breidenstein B. ^{[1
]}

Wichmann M. ^{[1
]}

Nguyen H.N. ^{[1
]}

Fricke L.V. ^{[2
]}

Barton S. ^{[2
]}

Maier H.J. ^{[2
]}

机构：

[1] Institut für Fertigungstechnik und Werkzeugmaschinen (IFW), Leibniz Universität Hannover, An der Universität 2, Garbsen

[2] Institut für Werkstoffkunde (IW), Leibniz Universität Hannover, Lise-Meitner-Str. 1, Garbsen

来源：

WT Werkstattstechnik | 2022年 / 112卷 / 11-12期

关键词：

17;

D O I：

10.37544/1436-4980-2022-11-12-41

中图分类号：

学科分类号：

摘要：

In addition to the geometry, the functionality of the component can also be adjusted on the basis of process planning by means of targeted subsurface influence in the machining process. Deformation-induced martensite transformation during the turning process provides hardening in the subsurface while maintaining ductility in the core of the component. Moreover, the surface roughness influences the component properties. The possibilities and limitations for simultaneous adjustment of both target variables through tailored process parameters selection are presented. © 2022, VDI Fachmedien GmBH & Co. KG. All rights reserved.

引用

页码：767 / 772

页数：5

共 50 条

[1] Monitoring of Surface Roughness in Aluminium Turning Process
Chaijareenont, Atitaya
Tangjitsitcharoen, Somkiat
2017 THE 2ND INTERNATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND METALLURGY (ICFMM 2017), 2018, 303
[2] Assessment of surface roughness model for turning process
Hadi, Yasir
Ahmed, Salah Gasim
Knowledge Enterprise: Intelligent Strategies in Product Design, Manufacturing, and Management, 2006, 207 : 152 - 158
[3] A surface roughness prediction model for hard turning process
Singh, Dilbag
Rao, P. Venkateswara
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 32 (11-12): : 1115 - 1124
[4] A surface roughness prediction model for hard turning process
Dilbag Singh
P. Venkateswara Rao
The International Journal of Advanced Manufacturing Technology, 2007, 32 : 1115 - 1124
[5] In-Process Monitoring and Prediction of Surface Roughness in CNC Turning Process
Tangjitsitcharoen, Somkiat
ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 : 1958 - 1966
[6] Experimental Investigation of Surface Roughness in Electrical Discharge Turning Process
Gohil, Vikas
Puri, Y. M.
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
[7] A study of computer vision for measuring surface roughness in the turning process
Lee, BY
Juan, H
Yu, SF
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2002, 19 (04): : 295 - 301
[8] A study of computer vision for measuring surface roughness in the turning process
Lee, B.Y. (leebyin@sunws.nhit.edu.tw), 1600, Springer-Verlag London Ltd (19):
[9] Influence of dynamic characteristics of the turning process on the workpiece surface roughness
Gvindjiliya, Valery
Fominov, Evgeniy
Moiseev, Denis
Gamaleeva, Ekaterina
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2024, 26 (02):
[10] Optimization of Surface Roughness in Turning Process by Using Jaya Algorithm
Khachane, Ashish
Jatti, Vijaykumar
TECHNO-SOCIETAL 2018: PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES FOR SOCIETAL APPLICATIONS - VOL 2, 2020, : 143 - 147

← 1 2 3 4 5 →