Dynamic parameters measurement of damping materials under hydrostatic pressure based on a hybrid numerical-analytical method

被引:0
|
作者
Tao M. [1 ]
Jiang K. [1 ]
机构
[1] School of Mechanical Engineering, Guizhou University, Guiyang
来源
关键词
Damping material; Dynamic parameters; Hydrostatic pressure; Numerical-analytical method;
D O I
10.13465/j.cnki.jvs.2016.07.015
中图分类号
学科分类号
摘要
For viscoelastic dynamic parameters measurement of damping materials under hydrostatic pressure, a hybrid numerical-analytical method was developed. Firstly, two different samples of sound absorption coatings containing cylindrical holes with two different radii were tested in order to obtain the two different measured complex reflection coefficients under hydrostatic pressure. Secondly, the complex reflection coefficients were calculated with FEM based on the structural deformation simulated with the FE method. Then, using the measured and the simulated complex reflection coefficients simultaneously, two nonlinear equations were established. Using Newton iteration method, the nonlinear equations were solved, the viscoelastic dynamic parameters including complex elastic modulus and complex Poisson's ratio were obtained. Then, two samples made with polyurethane were tested in a water-filled acoustic-pipe, and the effects of hydrostatic pressure on the viscoelastic dynamic parameters were analyzed and summarized. Finally, the reflection coefficient of another different sound absorption coating tested under hydrostatic pressure was measured and compared with the simulated reflection coefficient calculated with the measured viscoelastic dynamic parameters, the correctness of the proposed method was verified. © 2016, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码:96 / 101
页数:5
相关论文
共 17 条
  • [1] Fan J., Tang W.-L., Echoes from double elastic spherical shell covered with visocoelastic materials in water, Acta Acoustica, 26, 4, pp. 302-306, (2001)
  • [2] Fan R.-P., Meng G., He C.-C., Et al., Experiment study on viscoelastic damping materials for noise control in railway vehicles, Journal of Vibration and Shock, 27, 6, pp. 123-127, (2008)
  • [3] Li M.-M., Fang B., Huang W.-H., New type of whole-spacecraft hybrid vibration isolation system based on piezoelectric stacks and viscoelastic material, Journal of Vibration and Shock, 31, 16, pp. 148-152, (2012)
  • [4] Tao M., Zhuo L.-K., Effect of hydrostatic pressure on acoustic performance of sound absorption coating, Journal of Shanghai Jiaotong University, 45, 9, pp. 1340-1344, (2011)
  • [5] Park J., Lee J., Park J., Measurement of viscoelastic properties from the vibration of a compliantly supported beam, Journal of the Acoustical Society of America, 130, 6, pp. 3729-3735, (2011)
  • [6] Policarpo H., Neves M.M., Maia N.M.M., A simple method for the determination of the complex modulus of resilient materials using a longitudinally vibrating three-layer specimen, Journal of Sound and Vibration, 332, 2, pp. 246-263, (2013)
  • [7] Yuan H., Guzina B., Chen S., Et al., Estimation of the complex shear modulus in tissue-mimicking materials from optical vibrometry measurements, Inverse Problems in Science and Engineering, 20, 2, pp. 173-187, (2012)
  • [8] Yin Y., Liu B.-L., Bai G.-F., Et al., A study on polymer modulus test using laser-based finite element method, Acta Acustica, 38, 2, pp. 172-180, (2013)
  • [9] Piquette J.C., Shear property determination from underwater acoustic panel tests, Journal of the Acoustical Society of America, 115, 5, pp. 2110-2121, (2004)
  • [10] Song Y., Yang S.-E., Huang Y.-W., Acoustic parameters measurement of viscoelastic material in median and high frequency, Materials Science and Technology, 5, 1, pp. 44-46, (2007)