Study on interfacial potential barrier theory of friction and wear

被引：0

作者：

Xu, Zhong-Ming ^{[1
]}

Huang, Ping ^{[1
]}

机构：

[1] College of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China

来源：

Mocaxue Xuebao/Tribology | 2007年 / 27卷 / 01期

关键词：

Adhesion wear - Contact surfaces - Friction coefficient - Friction force - Frictional performance - Frictional surfaces - Interfacial potential barrier theory - Micro interaction - Ultra high vacuum atomic force microscope;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

An interfacial potential barrier theory to calculate friction and wear is proposed by considering micro interaction of frictional surfaces. In the theory, it is suggested that the performance of friction and wear depend on the magnitude and distribution of interfacial potential barrier on the contact surfaces. Then, the calculation methods of interfacial potential barrier and standard interfacial potential barrier were studied and the formulas to calculate friction force, friction coefficient and quantity of adhesion wear were derived according to the theory. The standard interfacial potential barrier can be used as an index to describe the frictional performance of material due to its independency and stability. The calculation results of friction force with some known experimental data are consistent with the experimental results carried out with an ultra high vacuum atomic-force microscope, and it shows that the theory is feasible.

引用

页码：54 / 59

共 50 条

[1] Interfacial potential barrier theory of friction and wear
Xu Z.
Ding L.
Huang P.
Frontiers of Mechanical Engineering in China, 2008, 3 (3): : 276 - 282
[2] THE INFLUENCE OF INTERFACIAL POTENTIAL ON FRICTION AND WEAR IN AN AQUEOUS DRILLING MUD
BRANDON, NP
WOOD, RJK
WEAR, 1993, 170 (01) : 33 - 38
[3] The nature of interfacial processes in friction and wear
Kuhlmann-Wilsdorf, D
SCIENCE AND TECHNOLOGY OF INTERFACES: INTERNATIONAL SYMPOSIUM HONORING THE CONTRIBUTIONS OF DR. BHAKTA RATH, 2002, : 207 - 218
[4] CONSIDERATIONS ON THEORY OF FRICTION - FRICTION WITHOUT WEAR
EUDIER, M
YOUSSEF, H
POWDER METALLURGY, 1969, 12 (24) : 462 - &
[5] Thermodynamic theory of friction and wear
Sadowski, Jan
Tribologie und Schmierungstechnik, 2002, 49 (06): : 41 - 47
[6] Slip and wear at a corner with Coulomb friction and an interfacial strength
Hu, Zupan
Lu, Wei
Thouless, M. D.
WEAR, 2015, 338 : 242 - 251
[7] Qualitative theory of rubber friction and wear
Persson, BNJ
Tosatti, E
JOURNAL OF CHEMICAL PHYSICS, 2000, 112 (04): : 2021 - 2029
[8] AN IRREVERSIBLE THERMODYNAMIC THEORY OF FRICTION AND WEAR
Dai, Zhendong
PROCEEDINGS OF THE 9TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2008, VOL 3, 2009, : 339 - 345
[9] METAL SCIENCE IN THE THEORY OF FRICTION AND WEAR
RYBAKOVA, LM
KUKSENOVA, LI
METAL SCIENCE AND HEAT TREATMENT, 1985, 27 (5-6) : 329 - 337
[10] An Irreversible Thermodynamics Theory for Friction and Wear
Dai, Zhendong
ADVANCED TRIBOLOGY, 2009, : 576 - 578

← 1 2 3 4 5 →